• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. 69greenleaf

    WTB 69 satellite lower dash panel in black.

    I am in search of the lower dash pad that goes around the headlamp and wiper switch panel on my 69 satellite. i need one in good condition in black. i have searched all over and have only found a few for sale and they are all in the wrong color. Also if you may know a website that reproduces...
  2. 69greenleaf

    FOR SALE 69 b-body factory heat/ac airbox

    I have a heater/ac air box that came out of my 1969 2-door satellite. $170 obo plush shipping.
  3. 69greenleaf

    best compression options??

    hello guys im looking to build a street/strip capable motor out of my rb440. its a .030 over block with a set of untouched 452's 89cc from what I have gathered online. I was running a .040 head gasket and my flat tops are .092 still in the hole at tdc. so that puts me around 8.4:1 cr...…. I am...
  4. 69greenleaf

    Cylinder head questions

    i currently have a 67 model 440 with late model 452 88-89cc heads. I’m hunting for compression. I recently found a set of heads in a local classics graveyard. The casting number is 2463200-3. From what I gather is is a 63’ model b/rb 383/413 head with 73.5cc chambers. Would this head be worth...
  5. 69greenleaf

    Cylinder head questions

    I have a 68 model 440 block and rotating assembly (Not the 6-pack setup) with a set of “untouched” 452 heads. From what I have been reading online measure out to 88-90cc,putting my motor between 8.6:1 and 9.0:1 (don’t know exactly how far the piston are in the hole). I’m wanting to get my...
  6. 69greenleaf

    Hughes whiplash questions

    i just recently when a got myself a whiplash stick for my 440. Stock lower end,452 heads and intake. 750 edlebrock, long tubes and assault racing distributor and coil. It’s a 76 model low comp block. Well to make a long story short I bought a tac for the car for the break in period. so I don’t...
  7. 69greenleaf

    Wheel dementions

    I have a 69 sattelite 2dr with stock tubs. I’m wanting to get more meat on the ground in the back without having to tub the car. I’m looking to get 26 or 28” drag radials under it. Is this even possible on stock tubs? I currently have 14x8 with 4.5 backspacing. Wanting to go to a 15” for the...
  8. 69greenleaf

    help choosing a cam

    i have a 69 sattelite with a 77 model low compression 440 im looking for a cam to pep the motor up for racing without having to tear into the lower end, or replace heads. i have heard a lot about the huges whiplash cam and am greatly concidering it for my application. I also spoke with comp cams...
  9. 69greenleaf

    Budget build

    hello all. I have a 69 2dr sattelite with a late 70s low compression 440. Motor is fresh rebuilt with stock lower end and heads, only after market parts are a edelbrock 1407, long tube headers and a hot ignition system. I have e been looking to make a budget racer out of the car. Currently...
  10. 69greenleaf

    Edelbrock problems

    hello all. I have been having hesitation issues when snapping throttle open quickly. I have a 1406 series 750cfm edelbrock on a almost stock (headers and slight cam) 440. I have already rebuilt the accelerator pump and adjusted it as well hoping to fix this problem. But it never fails to lag and...
  11. 69greenleaf

    HELP!

    I have a 69 satellite with a 440 bbl. At this point I think I am going insane trying to chase this problem down. I had an issue with no spark for a while I traced it to the ECM being bad. After I replace that the car has spark, compression, and plenty of fuel. I check ignition timing pickup gap...
  12. 69greenleaf

    Engine building help

    I know this doesn't fit in this forum very well but I don't know much of what I'm doing when it come to internal engine measurement so I'm asking for some help. I have just acquired a 302 motor from a 94 Ford for a project build and I have some questions. The stock crank has a 3" stroke and I am...
  13. 69greenleaf

    My car won't start!

    I have a 69 satellite 440. The car has been sitting for a while due to lack of money. Well I put the car back together finally and tried to start it. Everytime I turned the key on the coil started firing like crazy even before I tried turning it over. So I ended up tracking that back to a bad...
  14. 69greenleaf

    Mini starters

    I have recently purchased hedman headers for my 69 satellite 440. They said in the description that they require a mini starter for correct fitment. Well to make a long story short I have ordered and returned 2 different mini starter because they do not fit at all with my headers... In fact the...
  15. 69greenleaf

    Headman headers

    What is the best "mini" starter I can get to fit around my heaman headers on my 440. Just wanting to get the most bang for my buck.
  16. 69greenleaf

    no spark

    I need some help or advice with this problem. I have changed the coil and also checked my distributor and my ignition switch itself. I have gone through the wiring diagrams and check all of the connections into all of the wiring blocks and all of the connectors themselves. still no spark. One...
  17. 69greenleaf

    idle problems

    i got a 69 satellite. Well today i started my car to let it run, warm up and charge the battery. well after a good ten minutes the car was still idleing like the choke was still on at running temperature. to i pulled the air cleaner and found out that the choke was off and doing what i was...
  18. 69greenleaf

    selling stuff?

    Seeing as i dont know how to use ebay even though i am a young (technologically advanced) fellow. What would be the to selling my mopar parts other than ebay? because i haven't been getting any hits on my for sale threads in the forum world.
  19. 69greenleaf

    aftermarket trannys

    Not looking for an automatic, but does anyone know of any aftermarket manual transmissions that will fit my 69 satellite other than the passion performance a-855?
  20. 69greenleaf

    69 plymouth satellite

    Hi im alex greenleaf. I just joined this forum today trying to sell some leftover parts from my plymouth. As the title say i have myself a 1969 plymouth satellite 440 that started out as a family project. my father bought the car for him, my brother, and i to work on together. to make a long...
Back
Top