Search results for query: *

Looking for someone to install a vinyl top or anyone around the mid Atlantic coast who's recently paid for an install. Northern Harford County, Forest Hill area. My friend has a fresh out of paint 68 Charger. Some of the quotes he's got are outrageous, over 1k to install a top. Seems high...

I picked up an air cleaner somewhere, has a 360 4 bbl factory sticker. I put a CA305 filter in it, but it is just a bit too short at 2 3/4". The ID and OD are correct, 11 and 12.8 inches. I tried looking up dimensions on the Wix air filter site, but no luck with a match. Anyone know offhand...

Good friend of mine just swapped a mid 70’s 440 into his original 400 equipped D100. Kept the same weighted converter. Flexplate was checked for bends and cracks. He’s had 2 mini starters and lastly a full size original starter on it. All three have issues with the gear catching as the rpm...

A good friend of mine is looking for a floor shift P/S column for his 4 speed 69 Coronet. Anyone in northern Maryland or Mid-Atlantic area close by. Thanks!

Looking for a flywheel for a 318 with an NP435. I already have a bellhousing and the trans, just need a neutral 143 tooth ( I believe) flywheel. I'm in the Churchville/Aberdeen area in N Maryland, willing to travel a moderate distance locally. Morgan

Anyone going? I didn't see admission price on the website? Anyone know? Lists car show registration, vendor info. I'm just walking in with friends.

Cross posting this after an unexpected slow response on the A body list. I'm looking for non-vinyl drip rail trim for my Demon. I believe all 70-76 would be the same, Duster, 71-2 Demon and 73-6 Dart Sport. I'll be at Carlisle all weekend.

Demonic added a new event: The Big M Reunion, Havre de Grace, MD Read more about this event...

Good friend of mine has a issues with some Cardone brand 73-76 A body calipers. New rotors, pads and the calipers, no clearance when assembled, he says it's a bit tight. We popped the piston out of the bore and measured the depth to the opposing side. It is 1/16" less then the factory cores...

Looking for one or a pair of 15x7 steel wheels near Harford Co MD with 5 x 5.5 bolt pattern. One of the wagon wheels on my 71 Commando is bent. I may consider a set if in good condition.

Next Sunday, 9/19/21. The most wing and Aero cars in one spot in Maryland. Benefits the Petty Foundation, with Mr King himself attending. Registration was only $20.-, usually over 250 cars in a beautiful picturesque eastern shore small town. Food, games for the kiddies, everything you could...

Looking for one or two Saddle Tan screws for the front inner trim, along the windshield. This is the suede texture version in Chargers. One went missing when I did my headliner. 1969 Charger with tan interior. Thanks!

Pair of driver quality rear black pads, and one driver door pad. Were originally blue. Driver-quality, not perfect. Can deliver to Carlisle, reply here by Wed evening. $50.-

I must have not tightened it. Oval top pump, 1969 B body 383 with AC. Anyone have a few extras around? In Maryland, 21015. Thx in advance.

Looking for just one, not a pair, for the left side. With a sway bar tab would be nice, but not necessary.

Aaaarrgh! I hurt my 69 Charger. I clipped a curb a couple weeks ago coming back from the local Sat night cruise. Cars blocking the right lane, I favored the center too much - the median had a “bump out” curb. Took out the left front tire w only 800 miles on it. Dent in the outer edge of...

I'm looking for a pair of factory brackets that attach to the k member. Ones in good shape, never curb kissed or dented. Thanks in advance.

I'm putting together a new set of 3.55's, Yukon R & P, New Timken bearings, new Auburn sure grip. I'm having trouble with the pinion bearing preload. It's either 55 in. lbs or about zero. The preload shims in the kit go in .005" steps. At .045" it has no preload, spins easy. At .050" it...

In the swap section, maybe row F or closer to the fence. Saw a ice blue trunklid for a 68 Charger on Sunday, couldn't find the space owner. If you're on here, send me a PM. Friend on mine is looking.

Can anyone post pics of your shoulder belt elastic setup? I have everything I need to put mine back, just need some pics for guidance. Thanks in advance.