Search results for query: *

I have seen many comments on R4 being called "Performance Red" but every paint chart I have seen calls it "Barracuda Orange". So where is anyone getting the name "Performance Red"?

Here is a Dodge Motorsports timer, till in the original box. $15 plus $10 shipping. Order multiple items ag get all shipped for $10 max! See my other adds. Thanks, Ed

I have some original Pentastar Key Fobs , They are in USED condition. These were given to new car owners and the registered to the owner by the number on back. If they were lost the finder could just drop them in a mailbox and they would be sent back to the Chrysler Headquarters in Warren...

I have three Dealer pocket name tags. These clip on tyo your pocket. Each tag is $15 plus $10 shipping, If you name is BILL, you need these!! See my other adds and get multiple items for $10 MAX shipping. Thanks, Ed

Mopar Dealer promotional items, Chrysler Pentastar tie tac, hat pin,,, Dodge Motor sports tie tac, hat pin,,,, Ram Bandana, 21" x 21". New pins in packaging will be sent first. All item $10 MAX shipping on multiple items! See my other adds, Thanks, Ed

I am installing a pair of Halogen headlight in my gasser and they are a tad bit longer than the stock sealed beams so the plug sets against the bottom of the bucket, very tightly. I need a 3 wire headlight plug with wires offset at 90 degree and only 3/4 inch, or less long. I got a pair of...

I have a 440, stock bore with a cam, dual quads and headers. It also has a Melling HV/HP oil pump and pegs the gauge when the engine is started. The previous owner used Valvoline VR1 10-30 AND added a can of ZDDP. I am considering VR1 in 20-50, Can you have too much oil pressure?

Here is a story of 4 master four M cyls! I purchased my 69 RR in 2019. It had front disc conversion, single piston calipers, adjustable pressure valve for the rear, stock rear brake system, NOT power. (1)The first cyl. leaked around the cap, as it was a rebuilt unit and apparently sand blasted...

I have many vintage Illinois License plates. Yes, in Illinois you are allowed to use vintage plates that are the same year as your car if you have legal vintage plates. Inquire with your required year. These are decent used vintage plates and show bumps and bruises but will clean up nice with...

I have the right and left door belt moldings for an Early A body convertible. These came off of a '63 Valiant. They are in decent restorable condition, one has a bend in it that can be straightened. $50 for the pair. Shipping is an option. Thanks, Ed

Sorry!!!!!

I have the two trim pieces that hold the snaps for a convertible top off of a 63 valiant. Thert is an extra hole drilled in each piece. Normal bumps and bruises for these original pieces. $150 plus shipping.

Here are three NOS 1542 314 Plymouth emblems with the boxes. The first emblem is the best and $100, the second emblem has a dark spot in the lower left corner of the blue and is $85, The third has light scratches in the paint from a staple that was punched through the box. $75. plus shipping

WTB like this one.

I picked up a nail in one of my Hoosier slicks. Took it to the tire repair shop and they patched it from the inside. They said the rubber is so thin on the inside that the cord shows through when u buff it and the patches usually don't hold well. It still leaks!!! What are my options?////////////

I have dual 9605's on my 440. Do I hook up the PCV on the rear carb, rear port , the front carb, front port, or both carbs with a Tee?

I just purchased a car with Hoosier slicks. Is this wear patteren normal and do I need to rotate? side to side?e to side?

I recently purchased a car with a 76 440 truck engine. I just discovered that the valve covers were the early 4 bolt type. Although he said stated "The heads have been milled .030, port matched and had the bowls blended, and had a valve job" he never stated he replaced the heads. Where these...

Hey guys I need opinions on the best way to install this linkage to get the easiest push. In your answer give me the hole number of the pedal, then short arm on the crank,. then the long arm on the crank! THANKS!!!!!!LK