Search results for query: *

Hey all, I'm a bit stuck moving forward with my build and would like a few opinions. The original plan was a LA 408+ stroker using the 360-1's and manifold that flow around 320-330 (as I recall). It will be going into my 64 Dodge Phoenix with a built 904 /5k stall and 3.9 9". Cam will be a...

Hi All, First off, as always thanks in advance, tons of knowledge on here... Second - apologies for the long read! I have a '64 Phoenix (330/440 4 door) that I can't make a decision on an engine for. I already have a cruiser in the shape of my 63 cadillac so am planning on adding to the bruiser...

Hi All, Just wondering how people have run a return style fuel system on a 64 dodge? Particularly between the tank and the front leaf spring mount? As per the attached photo’s the previous owner used copper of all things and was obviously happy bending by hand, kinks and all. Due to local...

Hi All, With the many posts about the 727TF’s shattering when driven the wrong way, I’m wondering whether it is at all possible to use or set up a 727TF for street sprints/track days at all? While I’m trying to keep costs down should I be looking for something like aTH700 or later GM to go...

Hi All, Just looking for any recent experience good or bad with any of their motors? (have done a search) Specifically looking at the 408/445 long motor. Value for money? I've already got a RPM air gap, MSD and good 750 DP carb. $5800.USD or $11250.00 AUD locally which is on budget. Otherwise...

Hi All, Just a question on how much difference or power more compression can make? I have recently stripped down the top end of a 360 LA where all measurements calculate out at a comp value of 8.73. This made 280hp with a Crane f248, 248/258@.050",110 lobe sep, .540/.560" lift with a 1.6...

Hi All, Just wondering if anyone has ever successfully used or set up a manual valve bodied 727tf for circuit racing? Alternatively has anyone done a decent 5sp manual conversion with anything other than the generic tremec ($$$) boxes? I've been wanting to do some track days with my 360 dodge...

Hi All, I've just realised that the swar bar is missing from the front of my 64 phoenix (OZ) Can anyone recommend where I might fin a new unit at all? Thanks. Graeme.

Hi All, Thought I'd share some pics of my 64 which will hopefully be arriving tomorrow afternoon... 64 Phoenix, worked over 360, 727 / 3000 stall and 9" with 3.9's. Unfortunately sometime over the years it's lost it's side trim. :( Cheers Graeme.