Search results for query: *

70 RoadRunner, 383, 4sp , #'s matching car, Saginaw pump. I need to purchase a high pressure hose, looking for suggestions on where to get a good, quality hose. I'm seeing a lot online but I'm skeptical on the quality. Any and all will be greatly appreciated.

70 RR, 383, 30 over,Hemi Street Grind/purple shaft cam. Firecore distributor to convert to electronic ign. Started getting a miss under load, 2nd and 3rd. I pulled the coil wire from the Accel Super Coil and oil poured out, the coil is 6yrs old and the second Accel Super coil I've had on it...

70 RR 383, 4-spd, Edelbrock carb, Carter mechanical fuel pump. The car will idle fine and drive good for about 20 minutes and then it starts to hesitate and just stalls out. I'll check the carb and it's not getting gas, if I pour a little gas into the carb it starts back up (this is how I got it...

The drivers side, low beam headlight on my 70 Road Runner needs to be replaced. How do you access it to remove it? I'm not even able to see the plug connector let alone get to it. Any tips are greatly appreciated.

70 RR, 383, PS , headers, (Firecore Electronic distributor). I'm looking for ignition wires suggestion for this setup. I bought the Edelbrock Max-Fire (Ultra-Spark 50) Universal Flex Boots Spark Plug Wires which are good quality wires but I don't like how long the boots are, a couple are up...

Looking for a flywheel for a 70 Roadrunner, 383, factory 4-spd with 11in clutch

70 RR, 4spd 383, .30 over , headers, hemi grind cam(purple) I currently have Champion RJ-11Y plugs in it. What plugs are a good choice for my setup?

I need to replace the horn relay in my 70 RR. Any tips/tricks on how to best get to it? I wasn't sure of removing the lower left dash pad might give me an access path? Any advice/direction would be greatly appreciated! Thanks Tim

What's the bulb for a rear side marker light on a 70 Roadrunner? Can you get them at a local parts store?

I'm looking to add a passenger side mirror on my 70 RoadRunner, it's a finished car so I need to get it perfect on the first shot. If anybody has any kind of step by step,tips,what I'll need or point me in the right direction I will greatly appreciate it.