• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Users: Green72
  • Content: Threads
  • Order by date
  1. G

    Hellcat swap 67 GTX wiper motor options

    I'm doing a Hellcat swap on a 1967 GTX. The stock wiper motor interferes with the super charger crossover manifold. I was aware that this would be a problem. I was told an aftermarket 2 speed motor may clear. I have looked and can't seem to find one. Would anyone be able to point mr in the right...
  3. G

    Rear end housing measurements

    Finally got my wheel/tire combo put together. I’m mocking up there position so I can order an axle housing. I built a sliding (axle housing) that you can see in the pics. Obviously I’m looking at all the clearances and such. I am wondering if there is anything else that I need to consider before...
  4. G

    WTB 1967 GTX inner fender splash shields

    I need a set of front fender inner splash shields. New, used or reproductions are fine
  5. G

    FASTENAL for the win!!!!

    I sold an engine to another member on here and he wanted it shipped to him. I call a couple places and was quoted about $750 from Iowa to Michigan. Then I remembered hearing on here a few times about Fastenal shipping. I call them and then did an online quote. They shipped it for $195. I crated...
  6. G

    What does this tab do

    Tab is on inner wheel house. Does it do anything
  8. G

    SOLD 1967 727 auto and Gear Vendor OD

    I have a good 727 , shifts really well. Has been rebuilt but before I got it so I have no history. Also a low mile Gear Vendor OD. I installed this new two years ago and have roughly 4000 miles on it. Works excellent. Also included is the stock tail shaft. $2500 I could separate. I can ship with...
  9. G

    FOR SALE PST 1967 BBody Torsion bars

    I have an extremely low mile set of 1.03 PST torsion bars for sale. Installed and removed with correct tool. No nicks or scratches. Includes clips and rubber boots. $175 plus shipping. Lisbon Iowa 52253
  10. G

    SOLD 440 Rb based 505" Stroker

    I have a 505 stroker engine that I would like to sell. I built this engine in 2019 and have put about 3000 miles on it. It runs perfect and has a ton of power. Rotating assembly was purchased from Hughes Engines. He also did all the machine work. The block was sourced from a 1976 motor home...
  11. G

    Welding tips or suggestions

    I am mini tubbing my 1967 Plymouth and have cut the old wheelhouses out and the additional 3 inches to the frame rail. I'm not super excited about cutting the flange on the frame rail. Looks to me that that is compromising the strength in that area. I attempted to weld the floor pan to the frame...
  12. G

    AMD 3 inch wider inner wheelhouse installation (mini tub)

    I am in the process of installing AMD's 3-inch wider inner wheelhouses. I've never done this before but so far has been pretty straight forward. I thought some pictures of my process might help others. Questions or criticisms are welcome.
  14. G

    67 GTX wheel tire combo

    I am moving springs inboard and installing the 3 inch wider inner wheel tubs from AMD. The pic shows the wheel/tire combo that I would like to run. The wheels are a 15x12 and the tire shown is a Mickey Thompson 325/60R15. My question is will this work without other modifications?
  15. G

    SOLD Magnum 500 wheels and Goodyear redline tires $1000

    I have a set of Magnum 500 wheels 14x7, 4.5 setback for sale. Good year redline tires. Wheels are in fantastic condition; tire are good but 10 years old. Lug nuts and center caps included. Lisbon Iowa 52253.
  16. G

    Who makes a 335/355 tire that fits 15 inch wheel

    Mickey Thompson is the only one I can find. Does anyone know of others?
  17. G

    Inner wheel tub removal

    I am going to install AMD's 3 inch wider inner wheel tubs on my 67 GTX. This is my first time doing this. In looking at the factory flange between the inner and outer it appears to be "roll welded". Any tips or tricks for removing the inner would be greatly appreciated. Also,are there any good...
  18. G

    Amd 3 inch wider wheel houses and rear seat

    I would like to install the 3 inch wider wheel houses on my 1967 GTX. Will I be able to keep the stock back seat?
  20. G

    What comes first wheels or rear end???

    I've searched until my eyes bleed. I am embarking on a build that will test my skill set for sure. I would like to know what a good procedure is to determine rear end width vs wheel/tire combo. I will be starting from scratch on the rear of a 1967 GTX. To me it's kind of like what came first the...
  21. G

    WTB WTB 66/67 Belvedere II

    I would like to find a top shelf restored car. Preferably not GTX to keep cost down. Any engine/transmission is ok
  22. G

    1967 Belvedere Hellcat swap hood clearance

    Doing research on swapping a Hellcat into a 1967 Belvedere. I want to use stock hood, anyone know if that will work? Open to different front suspensions to use stock hood.
  23. G

    SOLD Free Free 440 parts!!

    I would like to get these parts out of my shop. I do not want to scrap!!! I tore down a 440 for a stroker project and have almost everything that I took off that block. Motor appeared to have extremely low miles. The motor was sourced from a 1976 RV. Heads Exhaust manifolds Cam Starter Timing...
  24. G

    ring and pinion swap

    Going to swap the gear out of my 8 3/4. it will be my first time. The rear end has very few miles on it and works perfectly. Could someone humor me with a parts list that I will need. Thanks
Back
Top