Search results for query: *

Would a 3 speed wiper motor from a 72 Satellite work on a 69 Roadrunner?

Help!!! I feel I’m in front brake hell!, I’ve ordered 3 different sets of rotor not to mention the bearings and the pads. Got the right pads but I can’t find the rotors. Anyone know what part number I need for a 1969 roadrunner with the 4 piston calipers. The rotors in the picture; Left one...

Volunteering my build for a keyboard dyno session LOL. Just curious what the experienced forum members think my current build will output. 440 .030 over L2355 pistons flattop 4v relief Trickflow 240’s SFT .534/.540 239/242 @ .050 112LSA 10.5:1 CR 6bbl with port matched Edelbrock intake 1-7/8...

Hello as I’m going through my 727 I noticed rub marks on the shell and on the welds of the front planet ring gear. The thrust washer looks like it’s never been touched! Is there different thickness 3 tang washers available? This one measures .062 and like I said it’s apparent it’s never made...

I am currently building my 440 which I had the machine shop balance for me. It’s a forged crank and L2355 pistons My question is, what harmonic balancer should I use? Am I right in assuming it should be a Zero balance Balancer and any converter I use shouldn’t have any weights?? I intend to use...

I am working on a 1970 Coronet with a 440 and TTi headers. Any suggestions on how to shift the motor over to the passenger side a bit. I only have minimal clearance between the header and torsion bar on the drivers side. It’s got new mounts as well.

Looking for any intake manifold modification tips or tricks. Getting ready to build my 440. Freshened it up and had it balanced. Got a new set of Trick Flow 240's and a mild custom cam from Dwayne Porter, (if Comp ever gets is shipped out to me.) I'll be using a new Edelbrock manifold, decided...

Hello, I am working with a 4150 style Quick Fuel 680 on an engine with a healthy cam, which I have jetted and tuned. Primary and secondary throttle openings are at a minimum and idles at 900. I didn't need to drill out the butterflies. 4 corner idle screws are 1-1/16 out. All my other A/F...

Good day, I’m hoping someone recognizes this cam number to help me identify it. Just pulled it out of a 440, solid flat tappet cam. Thanks for any help

I've getting ready to start my build up of a Hemi for street use. My intended use would be a hot street cruiser with best possible street manners within the street configuration. I can easily use manual brakes but will likely be using power steering and a/c due to hot south texas weather, I'm...

Hello, I just acquired a 72 Satellite with factory front disc brakes, the proportioning valve seems to have failed since I don't get any fluid pressure out of it at the rear brake output. I've searched in Mancini, Summit to name a few and I can't find anything that really matches. Any...

I got a 1973 charger I'm repairing for a customer, hard hit to the right front side. I've replaced the upper control arm and now realize the right spindle is bad too, Camber is too negative. Anyone know where I can find any? What year models/bodys interchange? Thanks for any advice!

Hello, I'm working on a 1973 Charger that was involved in a collision. It bent the upper control arm and today we received the new control arms. The problem I have is that the original control arms are shaft style and the new ones have the bushings pressed into the arms where I would assume is...

Hello, I'm new to the B-Body forum. I personally own a 71 Demon and a 70 Cuda and own a body shop. I always rely on the valuable help provided by the forum members on my projects and customer's vehicles. Today we got a 1973 Charger that needs a Right Front Fender, front lower valance and some...