Search results for query: *

When I purchased my 68 Charger a few years back it had the spare wheel/tire mounted in the trunk. I took it out and don't ever plan to put it back in. I am going to put it up for sale and wanted to get opinions on the value. Attached some pics for reference.

I’ve read through forums and it looks like the torque spec for the crankshaft pulley bolts are between 15-25 (or snug with common sense). Seems like this should be something that is specified in the service manual but looking on page 9-103 it’s not shown. Am I missing something? I guess my...

I have a 69 charger factory AC car. Came with a 5.25x1.25” water pump pulley. I have Removed all of the factory AC components and will not be putting AC back on anytime soon. I am needing a 5.25x1.75” water pump pulley so that it will line up with my power steering pump pulley. I am having a...

I’m gonna ask what is probably a dumb question. I’ve got all my brake lines installed/connected and now I’m down to bench bleeding my MC and connecting the lines to it. If the master cylinder has brake fluid in after you bench bleed it, how do you connect the remaining lines to the MC without...

I replaced my alternator a few months ago. I’ve noticed that my guage moves around a lot more. Before my gauge just stayed in the middle for the most part, but now even when I use a turn signal the needle moves, in sync with the signal. Is this normal?

I am in the process of upgrading my 383 two barrel to a four barrel. I've replaced the intake with the correct factory intake and am putting the carburetor on this weekend. I went with the Edelbrock 1906 as recommended by a number of people on here. My question is on the spacer. I am going to...

Today I just finished getting all of the front suspension put back in the car (69 charger 383). I’m running into an issue with the height on the front drivers side. The short version is the adjustment bolt isn’t seeming to raise the car like it should. The passenger side is at the desired ride...

Thinking about changing my two barrel carburetor out for a four barrel. This for a 69 Charger 383 car. Any recommendations on “kits” that include carburetor and intake?

I am going to be putting back together my suspension (control arms, spindles, idler/pitman arms, etc) and was wondering where I could get the torque spec info for this? This is for a 1969 charger.

I am needing to replace the proportioning valve on a 1969 Charger. This is supposed to be a factory front disc/rear drum car but recently determined that my master cylinder was for a drum/drum car. Didn’t think much of it but when I started looking for the proportioning valve that matches the...

Can someone help me out with the Bilstein part number a 1969 charger? Front shocks only. Is it 55-R082?

I am needing to replace my master cylinder on a 69 charger factory front disc brake car. I’m not interested in rebuilding the one I have. Just curious what other people out there are buying as an original replacement. This car isn’t ever going to see a racetrack or anything remotely close. If I...

I am in the process of rebuilding my front suspension and brakes on a 1969 charger. The car is a factory front disc brake car. I am keeping the stock suspension. I am looking at options for the caliper/rotor replacements. What options are there for keeping my stock spindles? I have been in...

Has anyone out there rebuilt calipers? I have the original disc brakes on the front of my 69. None of the original stuff has been replaced. With all the aftermarket stuff available is it worth rebuilding? Pain the a** or not complicated? I’m not worried about keeping my car original. I want to...

I am needing to get a shroud put on in the next few months (68 Charger) and wanted to get some suggestions. I have a Cold case radiator (MOP754A). The radiator has an 1-1/2” x 4” flange top and bottom on each side for mounting too. I have the stock clutch fan (2863216). The car was originally a...

Needing to replace my alternator (68 charger 440, added AC). The alternator that was on the car had part # 3874271 on back. What is the biggest amp alternator I can go with without upgrading wiring?

I am wanting to check if my water pump pulley is the correct one for my set-up. I have a 440 non-ac car that I added a vintage air kit too. My water pump pulley is double groove, 6” in diameter, 2-3/4 deep. The part number on the pulley I have is 38979. Should the Water pump pulley for an AC be...

I need to replace my alternator. It’s on a 1969 charger, 383, AC car (double groove pulley). Any recommendations on a good replacement?

I know this has been discussed a number of times on here, but I was wondering if someone could send me some pics, instructions and part numbers for the relay add, to fix the headlight issue on a b body (68 charger). My headlights go out after 10 or so minutes of my car being on and I am done...

I know this has been asked on here a number of times but I still need a little help. I have a 69 charger, 383 factory AC car. I removed all the factory AC stuff as I am going to eventually put in a vintage air kit. With that being said, for the time being I was just going to change the set-up to...