Search results for query: *

Does anyone know if this is the factory intake gasket for my 1968 Plymouth 383 2 barrel? I'm just curious if this engine has been apart before. When I unbolted the 8 bolts on the intake, it was loose, didn't seem like it was sealed at all. I'm replacing the factory 2 barrel intake and carb with...

Driver quality is fine. Any color is fine. Thanks.

After removing the nut from the upper shock bolt, I assumed it would slide out or maybe need a little persuasion with a pry bar. Nope, it's stuck in there and I've tried unscrewing it, used a crow bar to push on it and now my sawzall blade is bouncing off the bolt. Any suggestions? I can see why...

Looking for a set of front (amber) and rear (red) angled/curved marker lights. Driver quality is okay, some mild imperfections on the chrome would be acceptable. I have one rear light that's covered in primer, so I might be able to take some thinner to it and reuse it in a pinch. I don't need...

Looking for a headlight door for my 1968 Charger. Doesn't have to be perfect. Driver condition would probably work. 1968 may be different than 1969 so please make sure it's from a 1968 Charger. Thanks.

In July, 2021, I bought this 1968 Charger 383, automatic, PS, PB, AC car off ebay, sight unseen. The car was originally white with a black vinyl top and red interior. When the car arrived off the transport, the 440 engine included in the sale had been stuffed inside the car. The Charger had a...

I bought my 1968 Dodge Charger 3 years ago and I'm finally at the point where I can drive it! For some reason, the previous owner had the ride height really high (the adjustment bolts under the LCA were about maxxed all the way in). I dropped the car down on both sides which has given the car a...

Looking a pair of right/left sun visors in driver condition or better. I thought I could repair mine but it's not happening. My interior is red but I'll take any color. Is there a difference between 1968 and 69/70? I see listings that indicate they are different. Let me know what you have. Thank...

Looking for used OEM headliner trim clips for the side trim rails that run along the inside roof line. They go inside the trim pieces. I think there's 6 per side. Not interested in new reproduction clips. These are small and light and could be put into a bubble mailer. I'm willing to accept...

Need a decent armrest for my 68 Charger driver's door. Color doesn't matter. No cracks or splits. The armrest is about 13" in length.

It's the shiny trim piece that goes between the rear (quarter) panel and the upper pad/bolster for the interior. Has 3 or 4 tabs for sheet metal screws. Right side. Let me know! Thanks.

When I bought the car, it came with an aftermarket steering wheel that goes on and off easily. Why won't a 1968/69 Dodge Charger steering wheel go on? I don't think the steering column has been swapped out, it looks original. Hopefully something simple. What am I missing?

Let me know what you have and a price + shipping. I live in Portland OR. I don't need the small sail panel bows, just the 6 roof bows. TY

Compiling everything I need for my 1968 Charger headliner install. Have the 6 bows and the 12 clips, the headliner and trim. I need those small bows for the sail panel and the special clips that go with them. I may attempt to make my own clips if I can't find them. Also looks like I need the...

Currently listed on evil bay. Looks like a solid car with most of the hard to find parts included and a lot of the body work done. 4-speed car. Check Nose. Check Wing. Check Rear window. Check Trunk filler. Check Doesn't look like motor or transmission comes with. The "Buy it Now" price looks...

In August 2021, I bought a Charger on eBay, sight unseen for $16,000. It was mostly a complete car but was missing the original engine and transmission + some other parts. Included in the sale was a 440 engine and spare transmission. The car arrived on a transport truck, as seen below. The...

My '68 Charger has sat for 25 years without running and I'm trying to get the lights working. The under-dash wiring harness is in decent shape. I've got tail lights, brake lights and dash lights working but my emergency flasher and turn signals don't work. I've got power to both flashers and...

With regards to the bulkhead wiring plugs, I took the 3 speed wiper from 1968 Plymouth Fury III (C body) and plugged it into my 1968 Dodge Charger (B body) and the wipers worked, changed speeds and even parked. So that's good. Now, will the Fury engine and headlight wiring harnesses work with...

I got my 383 Charger running yesterday and noticed steam coming from the defrost vents. I knew that wasn't good. I let the motor run until the thermostat opened (which it did!) and then looked inside the car to see coolant dripping down from the heater box and puddling on bare floorboards (car...