Search results for query: *

Before I pull down my brand new headliner, how are the OEM shoulder harnesses mounted? All I have are the clips that mount near the sun visors to attach to, when not in use. I need to track down everything else. Before I do, I want to make sure I CAN mount them before taking everything apart...

Installed new lifters. Broken in with assembly paste, high zinc oil, and zinc additive. Car started and ran great. Still does except: When idling, I get a random detonation knock. It's only one and it's approx every 5-10sec while idling. I do have EFI so wondering if I contaminated the O2 sensor...

While trying to chase down an extremely loud, intermittent valvetrain tick, I found my rocker assembly in the following condition. I'm no expert, but it looks like one issue is lack of oil, judging by the scuff marks. Not sure if it happened when the engine was built or recent. If current, that...

I keep reading that I should check the adjustment of my rockers, when installed, but no mention of what I'm adjusting to. I'm installing new lifters because I had one fail. Once I put the rocker assembly back on, what specs am I looking to adjust? The lifters are hydraulic, so what's left? My...

Pulled the valve cover off my car to chase down and intermittent lifter tick. Previous owner caked a ton of silicone onto what looks like a black paper gasket. It's shredding off in micro pieces and taking forever to clean. Looking to just replace. They are a generic stamped steel valve cover...

Looking for one of these "tools". My garage helper misplaced the cap that came with my distributor. Unfortunately, there are none to be found anywhere on the internet, apparently. Would anyone happen to have one they are not using? If not wanting to sell, I would gladly pay to use it and return...

This thread was not posted by me and has been reported. Someone logged into my account from Pakistan via VPN. Admin is aware. I'll be checking recent action from my profile and post/delete as many scam threads as I can find. To top it off, the a$$hole deleted all my PMs so all the info I've...

This thread was not posted by me and has been reported. Someone logged into my account from Pakistan via VPN. Admin is aware. I'll be checking recent action from my profile and post/delete as many scam threads as I can find.

I searched this forum for half a day. Forgive me if I'm blind and missed a similar thread. I'll try to keep this as short as possible: When I let the car sit for a week or more the battery is completely dead. Like zero to where my portable charger not tender can read enough signal to turn on...

At some point, in a random thread, I THINK someone helped me out with this, but can't find the info after two days of searching. 1969 Dodge Charger Sniper EFI Hyperspark distributor Hyperspark coil Hyperspark (CDI) ignition box Sniper PDM Rallye dash with OEM tachometer There is no tach...

Hey guys. As I've mentioned in other threads, this is my first dealings with an older vehicle. Specifically, I've never owned a car with an external voltage regulator for the alternator. Is this it? There are no markings on it and it's difficult to trace the wiring through the harness. Just...

I was REALLY happy with my dash cover, but the company is no longer in business. It's just a simple "carpet" material with holes for the defroster. It just sits on the dash without need of velcro or any other fasteners. It's nothing fancy, just the right length and width. It's perfect.. but...

I have a guy that has a sure grip rear differential for my car. He states that it has a small yolk. Neither of us are sure if that would work with the driveline on my car. How can I tell? 1969 charger with unknown original engine and automatic transmission. I only know that once my engine and...

1969 charger 15" Vector wheels 8 3/4" rear end. Not going to be racing the car. Just looking for a basic rear disc setup. Something from summit, classicindustries, etc. I see most kids require a 15-in or larger wheel, but I know not all 15-in wheels are shaped the same. Is there anyone that...

I have a weird one, to me anyway. 1969 charger with stock wiring and ignition, as far as I know. EFI installed and was running well. I was given a harness with diodes to connect to the switched power source going to my ballast resistor. That gives me a 12 volt switched source to run to my...

I hate to make a post for this...

I'm playing with different options on a few different sending units. I am unable to find a way to mount the bulkhead for the fuel return. Here's an example of what I'm dealing with. When using an aftermarket sending unit, this one came with the return line installed. I was told it was 3/8. It is...

1. I'm new to building cars this old. I've spent my life working on anything from the 90s and later. 2. I'm still learning the vocabulary, so when I hear ammeter, I don't know where or what it is LOL (I assume it's the actual gauge in the cluster). So, I have a Sniper 2 installed on my '69...

As the title states, I'm installing a sniper 2 onto my 1969 Dodge charger. The plate and post, I guess you call it, from my carburetor does not seem to work on the sniper setup. What is everybody using for the throttle cable and kick down on b-body? I did a search and only found results for an...

So.... redoing the fuel system on my '69 Charger. The square, metal "ring" or "plate" that covers the rubber filler seal, in the trunk, is rusted and all but useless. Does anyone have a part number or at least the proper item description so I can search? So far, all my searches bring up the...