WTB EFI HyperSpark Installation Tool - Counterclockwise Part # 565-31

[kaj750]

Looking for one of these "tools". My garage helper misplaced the cap that came with my distributor. Unfortunately, there are none to be found anywhere on the internet, apparently. Would anyone happen to have one they are not using?
If not wanting to sell, I would gladly pay to use it and return it.

Or .. if anyone has another method of setting the distributor, I am all ears. I tried to eyeball it best I could, the car won't even start now lol

Thanks, in advance!

 

[gkent]

Try Holley directly. FWIW I've had two "new in box" Hyperspark distributors that did NOT have those in the box.

Or you can say "screw it" and do this (courtesy Andy Finkbeiner):

The distributor can be locked down in any position you want. Is that a Hyperspark distributor or a Dual Sync? With the Hyperspark you put the engine at 35 degrees BTDC and then install the distributor with the rotor pointed at the #1 tower. With a Dual Sync you put the engine at 50 degrees before TDC and point the rotor at #1.

The beauty of this method is #1 can be any tower you want, just decide where you want #1 to be and go from there.