Search results for query: *

SGTPaul added a new event: North Oakland Mopar Muscle 27th Annual All Mopar Car Shop and Swap Meet Read more about this event...

Hi, on a factory exhaust clamp what would the finish have been In 68? I see some of the reproduction systems out there have bare steel and others have nickel plated. Which would be correct? Thanks!

My car came without any wiring. Trying to understand the path of reverse wire path down to the trans. ECS has the reverse light harness brackets (pic below). Can someone help out with the location of these on the car. I didn't see them when replacing the metal or note their locations. Or...

Hi, while getting parts together to rebuild my 68 440 HP I'm trying to decide if I should block off the exhaust crossover or not. My car is a 68 Charter RT 440 HP 4spd 3:54 Dana. Will be going all factory from front to rear. Living in the Detroit area and will plan on driving the car April...

Hi Gang, While readjusting a few things on the front of my 68 Charger I had to cut the L bracket from the inner fender to the radiator support (66-68) free from the inner fender. I must have welded the snot out of it when I initially welded them together since I destroyed that part of the inner...

Hi All, I'm having to redo some work on my 68 charger and don't have good quality photo showing the quantity and locations of the welds from the (1) cowl bracket to the (2) inner fender as shown in the photo below is the best I have (green circles is where I beleive the welds are at - these...

Hi has anyone installed an exhaust system from classic exhaust? If so how well did it fit. Thanks.

Hi, looking around and can't seem to locate a heat riser kit for my 68 440-exhaust manifold. Does anyone have a source for these? Thanks in advance.

Hi All. On my 68 charger I have a bag of shims from when I took my car apart. Some are round and others are U shaped. Which ones go where? Please let me know. Thanks in advance!

SGTPaul added a new event: Walter P. Chrysler Club, Great Lakes Region, Winter Swap Meet - Detroit Read more about this event...

Hi All, While working on my 68 charger I'm thinking my dimension on the front sheet metal might be a little off and would like to get the following dimensions as shown on the picture below. A = out to out dimension on L brackets at the radiator support to inner fender. B = back side of...

Hi, I'm looking for a body assembly manual similar to the one shown below for a 68 b body more specific a changer. I contacted the company that offers the one in the pic below but they do offer the one I need. They said maybe one day but don't know when. I saw a guy at a swap meet in Detroit...

Hi I have a 68 charger and looking for good used or new / nos j nuts, studs, nuts and washers (4 each) for my fenders dog leg mounting at the rockers. All the repro guys tell me they only sell them in a full fender hardware kit. Shipping to 48069. Please let me know what you have and $ in an...

Looking for a solid straight driver door shell for a 68 charger. Will consider 69 / 70 as well but prefer 68. Prefer to pick up. Willing to drive several hours from Detroit to pick up. Might be going to Indy show so could pick up there. Let me know what you got. Thanks FBBO

I was told that my 68 charger R/T 440 4 spd car would have come with chrome valve covers. True / False or maybe under certain circumstances? Any help is appreciated. Thanks in advance.

Hi All, Hoping someone can help. was sanding out the evercoat finish sand primer on the car yesterday and noted that the pain had chipped off the bottom of the seam sealer at the drip rail. Pushing on it elsewhere in the drip rail channel it kept cracking and popping off. I used SEM single...

Noticing the primer on the vinyl sleeve covers on the wire body wire holder that came on the panels from AMD is cracking and falling off. Looking at the original ones it appears to be a liquid coating on the holders that is more flexible and the paint is not cracking . What do you do with the...

Looking for both tail panel "C" end trim pieces as shown below. Need to not have any corrosion to damage to chrome areas. Please PM me what what ya got. Thanks

Hi All, As I'm working thru my body work, I want to make sure I have all the correct holes in the botd for the emblems. In the parts manual it shows the medallion emblem next to the charger. However, on my car's original quarters it only had holes for the charger emblem. It's an R/T non-vinyl...

Hi, looking for a good left / driver door for my 68 charger. Prefer 68 but will consider 69 or 70. Will be going to Carlisle so can pick up there or a long the way from / to Detroit. Please PM me with what ya got. Thanks in advance.