Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Alright every buddy I'm finally getting stationed 1000 miles from home. I thinking of driving my wagon down I have put about 2000 miles on it with no problems. The only problem is the tranny makes a whining noise at take off and then it go away, is this something to worry about, or do you think...
Hey guys I need recommendation on the best machine shop in nor cal to take a block to be boil. I want a shop that is going to do a good job and get all the crap out of block. Thank You.
Alright I need a little help chossing a good cam and carb for my stock 1971 383 in my wagon. It has 2.76 rear end gears and stock exhaust manifolds that are going to be flowing though 2.50 inch daul exhaust. I'm looking for a cam that is going to wake it up and give it some decent power gains...
Ok right after i got my big block wagon going good. The right side exhaust collector started to leak, so i pulled it apart cleaned it all up and put a new gasket in. It ran fine for a few miles and the leak came back. I did knowest when I pulled it a part it had two gasket I don't know if this...
Ok to start the fuel gauge on my 71 satellite wagon is not working, so the other day I pull out the sending unit and cleaned it up and got it working. So why it was out I moved the float and made sure that the gauge was reading. Then I put it in the tank, turn the key on, the gauge went to full...
My project is my 71 satellite wagon, the same one I have in the welcome wagon. So for the people have not seen it. It is a 71 wagon with a 383 that I got from the orignial owner. It had been dry stored for 16 in the garge. It will be a slow project but I will posted as I go. Let know what you...
I'll start by saying I search this for a good hour and found nothing. I have a 71 383, but when I got the car the distributor was out. I got the car to #1 tdc compression, but what cylinder dose the rotor need to point to #1 on the left or #2 on the right. I know on gm it #1, but some told me...
I'll start by saying the I resenty pick up my first mopar. It is a 71 satellite wagon with a 383. I got it from the orignal owner for 400, it had been sitting in the garge dry stored for 23 year. It sould be a fun project and keep me busy.