Search results for query: *

Air compressor tanks blowing up are no Joke I am ordering a new 100 gal tank thats inside has been treated & coated to prevent rust not cheap but I have a 50 cfm pump and run a 175 PSI

Are you serious or just Joking around ? Hard to tell ? Can it be saved Yes, Should it be saved ? Questionable unless it was a Hemi car or a 440 car? And even then a 440 car is pushing it hard with the current market the way it is. What options did this one have? Its not a Sunroof car, was it a...

Nice score good price to boot! That rust doesn't look bad at all buy half quarter panels and cut them up for rust repair panels make the job of saving you originals easier. The rust around the windows is easy as well. But not as easy as the quarters. As was said the Rust will be deeper than...

Looking for a complete Rear sway bar assembly for a 71-74 B body Must be complete with Frame mounts and all hardware Nasty dirty is fine I can clean and paint. If you have a good Link for good after market kit for front and rear increasing bar size that may help as well not against after...

WOW its been 5 years since my last post! The car is still siting as it was when I discovered the adhesion issue except most of the red was stripped back off to bare metal, But the 70 Firebird is nearing completion now. Promise to self complete this car after Firebird!

There is no way I would sell that car that cheap. I would put a 500 cube stroke kit in and have a hell of good time CHEAP! Youll never get another one with those colors and Bucket interior that cheap. In another 10 years that's cars value is gonna skyrocket. They just don't make Coke bottles...

Well I looked at it yesterday in disgust as I had to turn my attention to my Fire bird project, were I welded in a Patch on the rear quarter panel.

Sorry about updates on this project not long after last pic was taken I discovered an adhesion issue with my Base coat not adhering to my Epoxy primmer and all Base coat must be removed and start over to say the least I was devastated and I lost interest in project for a while. I have since...

What the Heck u wanna move to Pahrump for????? Cant belive how many do retire here - - - Updated - - - Sorry no Sat/RR we are gonna cut the quarters off of the Sat and a 72 Charger soon I think

Thats EXACTLY How I got my name by the way Back in the day when I was a Whipper snapper PUNK Hot Roddin an Old Charger and a TA A Good Friend an I were Boxing in a SUB frame on his Sub frame on his 71-72 BB Dart and I start runnin my mouth about he had to buy this and he had to buy that and...

I mean really What all is there to it? crank sensor cam sensor Mass airflow intake temp throttle position a few special connectors the pins of which are removable and replaceable. To many these days are convinced they have to BUY every thing, What the Hell happened to REAL HOT ROD's when guys...

Why not make your own harness?

Ok so the Kid drags home this 5.7 complete nothin else tho, Starts all this crap we can do this, we can do that, with it we can buy this, we can buy that,.... ok...... then it sat for two years under the bench..... Ok this things been in my way a long time & the kid as expected didnt do squat...

Thank you every one that has contributed to this thread I gave up trying to find local welding expert around town and called Miller Talked with a Tech who walked through all the connections the machine is correctly hooked up for Tig welding. as is The Hi Freq box and machine works so its the...

Thanks Guys While I disagree with Emore's 1/16 Gap and Gas flow that hi I agree with every thing else. I know your an instructor I respect that an all But Butt welding 18 gauge sheet metal with a gap is a looser That I know for a fact and Im not outside in a strong breeze I'm inside so I think...

I started with 1/16 but switched to .040 keeping machine under 50 yes have foot control using a Miller shopmaster 300 and HF251 yes have foot control NO no controls on Tig handle. Im convinced at this point that its because my machine is way to big for the job like using a Bazooka for a 22's...

Im not so sure I have the machine set up right either been through the books I don't know how many times. confusing part is about the Remote foot control and which switches should stay on panel or remote ? Power source Miller shopmaster 300, Miller HF251, ANY HELP greatly appreciated - - -...

Hey any one around that can give a guy some good old fashioned this is how ya do it lessons? Welding I have some nice equipment but it dont make me a good welder, I got my migs down pat im ok with them, Its this Tig welding deal what a pain to try and teach your self. I'm using .040...