Search results for query: *

Just wanted to pass this on- craigslist scammers are everywhere! Ran into this ad for a Hemi engine on Craigslist, London, UK. They are pirated photos from an EBay sale 3 years ago and are a complete scam. I verified this with the EBay seller who still has the engine. A second hemi engine on the...

since 3 light tail panels on the Coronet are not reproduced, can anyone advise on how to restore an original tail panel? Were they chromed originally or just polished aluminum? Any recommendations for someone that can restore these panels?

Does anyone know if the 1969 Coronet 3light tail panel is being reproduced? I've looked around on-line and can only find the two panel. Thanks!

Does anyone know if the door lock mechanism is being reproduced or is there a rebuild service? The door will not stay closed tightly on my Road Runner and it appears the spocket wheel is sloppy/worn out. Suggestions appreciated.

hey guys, I am working on a 69 RR Console Automatic and the car will only start in neutral. I am wondering if my wiring is dorked up. 3 wires to the switch- violet, black and brown. Violet is hot all the time regardless of drive selection or key position. Brown and black are unpowered...

i just bought a 440 block to use as a spare stroker engine. After removing the timing chain cover, I noticed the casting broken away above the camshaft. See photo. What impact does this have on oiling? Thanks

Can anyone recommend a solid engine builder that specializes in Mopars somewhere in central PA?

just installed a Hop Not kit on our 2010 Challenger RT and thought I would offer some thoughts for those of you with manual transmission late model Mopars. As you know, wheel hop is a real problem on launch and this kit is designed to eliminate the problem. It took about 6 hours to install and...

Hey guys, I bought a new Hurst Comp plus 4 speed shifter kit for my B Body with a console. Shifter works great except that the supplied shifter handle in 1st and 3 rd hits the dash ( comes too far forward). When I compare it to the stock shifter handle, the new one does not bend back as...

Racers, I'm looking for some advice. I have a '69 Coronet R/T Dana 60 3.54, 502 stroker, 4 speed. Dyno'd at 513 HP and 600 lbs. best run last year was 12.8 @ 113 on street tires. I have 15x8 Cragar wheels in back. What is the largest drag radial I can squeeze in the wheel well on the 15x8s...

My buddy went along to Cecil County Dragway in MD and snapped some photos. He's the same one that took the photo of the R/T along the Susquehanna at dawn. The car ran a 12.8 @ 113 on street tires with a 4 speed and 3.54 gears. My first time down the track with it!

A friend of mine is a hobbiest photographer and convinced me to get up at the crack of dawn for these photos. Thought you all might like to see them. These were taken along the Susquehanna River in Pennsylvania. Let me know what you think.

Anyone have a drivers door window sweep for a '69 Coronet? Mine is missing and I really don't want to buy a whole new set. I'm hoping someone has one laying around they would be willing to sell.

I'm thinking about switching from my current setup to MT Drag Radials. I'm trying to figure out the best comparable size combination and get the most meat on the ground and still clear the wheel well and leaf springs. Who else is running MT Drag Radials on a 69 B-Body (Coronet with Dana 60...

Hello all, We raced my '69 Coronet RT for the first time at Mopar Nats this year. The car has a 502 stroker, 4 speed and Dana with 3.54. My daughter was driving and had a best of 14.5@103. Pretty slow but she ended up spinning tires badly on launch every time. Can anyone recommend a wheel...

Can anyone tell me where to get a C-3951 shifter alignment tool? There is a slot for a neutral alignment pin but it doesn't go all the way through. The reverse tang is in the way. The manual refers to the C-3951. Is there any other way to get all the tangs lined up?

Can anyone tell me on the shoulder harness for a '69 RT, does the elastic strap snap on the harness or on an attached snap behind the harness mounted through the head liner? thanks!

Heads up to anyone looking to install TTI headers on a Mopar big block with 11" flywheel- I discovered that the mini starter sold be RobbMc performance (recommended by TTI) no longer clears the header because the dimensions changed on the starter. Even though the starter is adjustable, the...

Anybody have a recommendation on where to get a new tapered tube for a 69 b body?

Carb expert needed- I have a new Speed Demon 850 carb on a newly built 440 stroked to 500". It's a 4 speed car. I am running a comp extreme energy 545 lift flat tapper hydralic cam. The engine has the Edelbrock performer RPM heads and intake. I just broke in the engine a couple of days ago...