Search results for query: *

Hey Guys, both of these wheels are on Ebay. Maybe it's the angle of the picture that makes one look like the spoke placement is a "Y" and the other look like a "T". Just checking to see if they had a different clocking on one year vs the other since both of these are being sold as a 69 Wheel. If...

What is the correct wood grain steering wheel for a 69 Charger. I see some where the 3 spokes look more like a "Y" and other that are more flat and look like a "T". Thanks in advance.

I've got the retainer plate off but didn't see the small hole to push the old ones out the first time. See it now. Thanks. -------- Mark.

Son of a gun! I looked at them before but didn't see the small hole you were talking about. Of course it could be the 50 years worth of use that had it hidden. Took a closer look and found it. Thanks for the tip. Love getting advice on how to do it easier and faster from the guys that have...

Moparedtn, thanks for the feedback. i'm not replacing the cap itself just the "O" looking bullseye insert that goes into the top of the cap. If you go into eBay and type in "CHARGER GTX SUPERBEE B-BODY CUDA E-BODY MAGNUM WHEEL CENTER CAPS INSERTS" it will show you a picture of the insert.

I was thinking about a very small chisel and small hammer. I'm looking for ideas on getting the old ones out and open to suggestions, hopefully from someone who has already done this. There's no way to push them out from the back side as it's closed. Thanks. ---------- Mark.

I guess I could glue the new ones on top of the old ones but thought I should remove the old ones first to provide a good surface to glue down the new ones.

I've got new "Bullseye" center cap inserts on the way for my Magnum 500 wheels and was curious how to remove the old center cap insert? I was thinking about a chisel but open to suggestions if there is a better way. Also got the 3M adhesive 08061 on the way also.

Thanks for the tip on 10% discount. I think I know how I'm going to proceed.

Getting ready to rebuild the front end on my 69 Charger, 440 magnum and will replace the torsion bars. I was looking at $275 for PST 1.03 or $375 for Firm Feel's 1.00. Anyone had any experience with either of these?. Trying to get away from land yacht float to something a little tighter. I'll...

I had the same issue on my 69 Charger after I rebuilt the front end. The steering wheel only goes on one way on mine. Not sure about yours. I made the the front end guys realign the car after I put the wheel in the correct location. They were not overly thrilled about having to do the job a...

703 it is. Thanks!

Oh let's hope we don't have to bore the block. You're right. That would be a different animal that could result in a additional wave of spending and possible divorce LOL! Since it isn't a daily driver and I'm wanting to have some fun I think I'm going to settle on the 703 save my nickles and...

Hey Curiousyellow71, definitely wont be towing but might be doing some hauling. LOL! I'll pose the same question to you as I did to 451Mopar. Considering my use will be general cruising with the occasional street encounter would the 702 be the better choice than the 703. It will make one trip...

451Mopar excellent feedback. Since most of my driving will be general cruising with the occasional street light to street light encounter. Do you think the 702 would be the better choice or do you think there would be only a slight difference between the two. Appreciate the feedback / advice.

Hey BSB67, I keep mentioning budget because I need to stick with my stock heads and rocker arm assembly. Some of the post have mentioned going with new heads. The refresh / rebuild will be done regardless while the engine is out. cam, lifters, timing gear, turn the crank, hone the cylinders and...

No but I'll do that right now. Thanks ----------- Mark.

Hey wyrmrider the 703 is for my 69 Charger. Cam selection is like a dark science to me and I really appreciate everyone's opinion and / or prior experience in this area. Before I spend the $500 for the cam kit I'd like to make sure I get it right. Just curious as to why do you think the 703...

I think I settled on this one. https://www.lunatipower.com/cam-k-kit-chr-b-v271h10.html

Curiousyellow71 great input. thanks for the insight and I'll definitely check them out.