Search results for query: *

After pulling out the dash we found that the nuts that hold the gas gauge in place were loose and they were not making contact with the circuit board. Tightening them up and cleaned up the connection.... good to go.

Yeah Steve, we've been down that road already. Trust me, the last thing I want to do at this point is pull the dash out. Thanks for the advice though.

Okay fellas. Here is the engine bay finished except for the air cleaner as I am going to be doing the final timing check and tune on the carburetor today. Also attached are photos of the interior finished. Keep in mind this car was just a shell with no motor / tranny / interior when I...

Quite right Photon. The guy changed the original Quadrajet Rochester carb to a Holley carb at one point. This resulted in the clearance issue he had with the stock ram air cleaner. He took the air cleaner off and promptly lost it over the years during a house move. I don't mind the gold...

It was last registered in 1991. The gentleman who owned it said he ran it last year. It does turn over but without the proper tools and garage set up I didn't want to try and run it. Once I get my Charger all buttoned up I'll bring this into the workshop and really get into it and see what...

Hey guys. I started a thread several months back about my 69 Charger R/T rebuild. That is almost finished. I have been so busy with work, family, and the restoration I just haven't had time to post many pictures or provide many updates. Soon I will be posting updated photos of the finished...

PM sent

Wasn't even close to clearing my 69' Charger R/T. Had to go with a stock height intake manifold so I could use the stock air cleaner.

The electric vacuum pump is $310. I just ended up buying the hydraulic brake boost kit with new master cylinder for $700. I will pull off the current brake booster and master cylinder to sell that as a unit. Hopefully I can get back some of the difference. I'm going to put up a bunch of...

Prop what kind of set up are you running that in? Engine/cam ?

I have a problem with a new power brake boost system I put in. I ordered a new front disc brake conversion kit for my 69 Charger. It's all installed and now, due to the erratic cam I have in the motor, it is unable to draw any vaccum from the motor because the cam is taking it. I REALLY do...

PM Sent

Yeah I saw these two on eBay also. I was hoping someone in here might have the parts kicking around they might want to sell. I don't really want to spend $200 on a hood latch

Having a hard time finding a 69 Charger hood latch. I have the secondary latch I need the part that bolts to the radiator support and the lever that comes out through the grill. Thanks

Alright fellas... it's been about three weeks since my last post. What a headache I went through regarding the intake / air cleaner clearance. I see that H2E is currently going through a similar issue with the RPM intake. I really wanted to use the stock dual snorkle air cleaner to give it...

PM Sent for hood latch

H2E .... as I feared, the air cleaner does not clear the hood with that RPM High Rise manifold. I really want to use the stock dual snorkel air cleaner so I ordered a low rise manifold and I will be replacing it. It will be annoying to remove the work I've already done but I won't be happy...

Let's goooooooo!!!!!!!

Hell of job you're doin Mr. SpeedFreak. I went with the one-wire alternator on my setup just to eliminate these headaches lol. Wiring makes my head spin. I agree with the other fellas, it is impressive for someone your age to be getting this involved and have this much knowledge. You're...