Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Real WM21 Super Bee. The fender tag is intact, and it matches the Radiator support. The original owner ordered this car with a 383 four speed 3.23 sure grip diff. A/C, Bright metallic Blue with a White vinyl top and stripe delete. (I have this decoded, and printed out) This car is almost 50...
FINALLY. After all the busted knuckles and All the sweat (Texas heat) - and the $$$$$$.... finally got to drive my car. The brakes still have some air in them and I still have to wire up reverse lights and do a few other things, but I was able to take my girlfriend for OUR first ride in the...
I had this issue on my 68 bee. I eliminated the Bulkhead connector (I know this sounds cheap... but I did it nicely) with 3 sets of water proof pickup/trailer connectors. 6 prong plugs. - they're water proof, heavy duty and make good connections. (basically set it up into 3 sections) one (6...
I saw this on FB - after we talked about it at work a little - we determined that the raw fuel we currently run "cools" our combustion chambers. The vapors would make it run very lean and not provide any cooling. But then I thought - its 2014 - our technology is ridiculous - surely there must...
Thank you all for the help - I am fairly confident this is my ammeter shorting out (both terminals are grounding out, the one stud is really sloppy and so are the guts of the gauge). I printed out my wiring diagram got out some highlighters and found exactly what I was looking for. Im going to...
^ Pretty sure this just happened to me ^ almost set the car on fire..... Dodge68charger - what did you come up? did you just skip the ammeter and connect the wires together (heavy gauge red and black) and then run the heavy black alternator wire to you starter relay??
Im about to do this...
A local body shop will probably send someone over to give the car a once over for you (they can check the drivetrain out for you too. you'd have to call around in Mass.
Heads up to you - I made the deal on my car while I was actually sitting in the drivers seat. Felt good at the time...
Got...
I think my ammeter is trash...
I drew a picture to help me explain what I found...
I like to put my handheld volt meter to 'beep' to check for grounding all the time. So... I put the black lead to a bolt on the dash. Then the red lead to "A" NO BEEP. "B" it beeps. "C" it beeps. "D" it...
That would make a bad*ss sleeper. If I got it for a real good deal I would keep it. Put in a nasty small block, Drag race it. I personally wouldn't restore it - but we are all different.
Hahaha. I knew there was going to be at least one "ask me how I know".
I put a heavy 4ga ground to the body (to a fender bolt) and then I put a smaller one (an actual ground strap) from the back of the block directly to the firewall. This got me excited... I went to hook the ground up to the...
My floor mounted shifter is Arcing really bad when I hook the ground back up to the battery.
It melted a cotter pin.
here's the rundown.
recently replaced all batter cables and relay - hot and ground. worked really well (this was a few weeks ago).
YESTERDAY - I took the dash out to...
The add a leaf kit from summit was really easy to install – Ive read a lot of posts from guys doing it and figured Id give it a shot. For some reason my Factory Big block BEE has really chinsy 4 leave springs… it sat really low. They looked very tired. So I figured Id completely redo the entire...