Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It's come time to say goodbye to my 63 Dodge 330. I have posted information below. Getting a little too "Senior" to keep playing with this. I have an appraisal with comps I can send to anyone interested.
Location is East Coast (MA)
1963 Dodge 330 Sedan (street/strip) car built in SD 10 years...
My VDO water gauge is acting up. It's an electric gauge that seems to work fine at first. Climbs up until thermostat opens then goes back to about 195 degrees. If the car idles for awhile the gauge will climbs all the way to 250 degrees and holds there. The car is not overheating and temps were...
Can anyone tell me of a steel wheel manufacturer that makes a wheel that a 7" moon hubcap cap will fit. Vintique wheels have an 8" moon cap and I need 7" cap. This is on my Duece not the Dodge
Thanks in advance
Jack
Tuff Stuff Performance High Amp Output Alternators 8509RDPDP
Alternator, One-Wire, 100 Amps, 2-Groove V-Belt, Polished Finish, Chrysler, Dodge, Plymouth, Each (Polished Aluminum)
Never used in box (mechanic doesn’t like one wire and wouldn't use). Had it too long to return to Summit
Paid...
Does anybody know of a GOOD shop in Eastern MA area to rebuild a Ford 9” differential. Not looking for bargains. I want it done right and understand good work costs and I will have to pay for it.
Thanks in advance
Jack
I will be up front on this matter. The problem is on my 302 ford powered duece and not my mopar but I have a mopar that should give me 1/2 credit (and I never had a chevy).
The car starts fine idles perfectly, after a minute or so it just dies, no stumble or anything. I check for spark and have...
Friend bought new car. Supposed big cam (solid lifters). no other info available and it's clattering like hell. Whats a best guess at starting cold lash for this monster
Thanks in advance
Jack
Need some advice on a Edelbrock 600 CFM carb. Older unit, probably as much as 10 years, maybe more.
Starts great when cold every time. Starts fine with a nudge of gas almost every time after warmed up. If it stalls, you are screwed. It seems like it an instant flooded carb. Let it rest 10...
Just took the car out for a quick spin. It is a some what built 440 about 550 HP. Ran great until until it warmed up good, about 190. It started popping intermittently at all steady speeds. Single small backfires that go right away under acceleration. No problem at all under acceleration...
is it possible to hook up a one wire alternator wrong. One wire to battery and one wire to ground right. New Tuff Stuff alternator will only put out 11.7 volts and the alternator is very hot in a short time. Defective, yes???
Need a new alternator. Tuff Stuff 100 Amp $250. Flaming River 150 Amp $620. Could use the extra charge. Is the FR worth it. No problem spending the extra dough for quality product. Both one wire hookup
Thanks in advance
Jack
Electric radiator fan died today but wiggled wires and got back home in one piece. This four wire connector was very, very hot. Here is what I found.
No problem fuse will take care of it, right, nope.
This is a 30 Amp unbroken fuse. Check your fuses
PS: These were not cheap. I don't skimp...
One of the reasons this country is going down the **** tube. Reebok is coming out with these.
Very rugged look huh???
I'm too old to see this crap without getting pissed off.
I am trying to convert a 63 Dodge 330 to LED tail lights, easy huh, NO.
Installed LED new bulbs (HELLA) and they work great. Very bright light but directional don’t flash. No problem, need a new flasher, no sweat.
I have tried 3 LED flashers including one that said it needed to be grounded but...
I just had a new exhaust built for my 63 330 Dodge. The fuel pump is mounted on the "frame rail" and is way too close to the new muffler. The system was built this way to keep the exhaust up and out of sight and it works well.
Anyone have photos of the bracket configuration to mount the...
I know there are some very smart people on the website so a fan question involving physics (I think it's physics).
If you have two 2500 cfm fans, one pulling and one pushing does that mean you are getting 5000 cfm or does one "rob" from the other
Yes the car overheats in hot weather when in a...
Woke up this morning and found this out my window. Something very large has decided to take up a residence under my shed. As you would expect my wife is freaking out.
The muddy prints are about 2" in diameter. Looks like it is getting in (and out) on both East and West sides. The mud on the...
Looking for a 1963 Dodge 330 driver's side door lock cylinder with key in good to excellent condition. Can do purchase with PayPal.
Thanks in advance
Jack