Search results for query: *

Hi guys, My 73 Road Runner back fired so I went to restart her to suck the flame back into the engine where it belongs-and the new electric fuel pump kept pumping fuel and in less than a minute my new $7k Paint job was done! After cleaning up the fire damage I replaced the head gaskets. Before...

Hey Everybody, I blew a head gasket on my bird and need accurate torque spec's and sequences. Any recommendations on stock head bolts lube or lock tight or? Here's the low down; la360 340X heads Erson Cam Hot Street ET Bracket - .472/296, 106 L/C, Hi Flo I H Headers Edlebrock 7576 Air Max Intake...

Yes that's right. Thought I did but obviously I need to learn more about people as well. Expensive schooling my friend.

2/3s referring to the maximum RPM in 1st gear. 727 Street / Strip Stage 2 transmission is based on HP rating. Typically, comes complete with these components; alto red racing clutches, kolene steels in stock front drum thats modified, TCI flex red racing kick down band, alto red clutches...

Yeah, I'm a bit unsure still with the oil issue. Analyzing the oil is brilliant Unfortunately don't have the luxury of time on my side, got a race coming up I can't afford to lose or worst, forfeit as a NO SHOW. If only time and money wasn't factors - ok, sorry, dreaming again. I will continue...

Hi, Thank you, I appreciate the sentiment. I don't believe I know your Air Force buddy Tim. Should I run into him I'll tell him hello for you. ...and your right, this is far from OK.

Let me see if I can explain this better. I had a Stage 2 transmission when I drove my car to the tranny shop. The issue with that tranny it had no reverse and only 2/3rds in 1st gear because the band was adjusted all the way out and therefore needed to be replaced. I thought I would keep that...

Pete's Transmissions in Phoenix, Oregon

1973 Plymouth Road Runner LA 360 30 over 340 X Heads 1968 Edelbrock Air Max Intake Manifold Holley 750 Dual Feed Single Pump Vacuum Secondaries Custom Headers Uses* Street / Drag 1/4 Mile After I picked up my car from the transmission shop- Developed what sounded like I spun a crank bearing-...

While I was repositioning the throttle mount and cable to align with the carb in a straight line I recalled the machine shop I took my 340 X Heads to and this guy was a jerk. He didn't complete the job meaning he did NOT check, clean or even run a tread cleaner to the mounting holes and then...

Hi ya, No, it isn't the secondaries, it is the one on top you can see controlled by the lever on the choke. The red plastic

OK- I'm back after R and R the carb. It didn't seem like it was hanging up at the base. It is too early to fire her up -I have neighbors and it's only 7:35 am here on the west coast. I'll start her up at 8:30 - 9:00 My R/R is really loud when the throttle sticks up in the high RPM range.

No, I haven't checked that yet-glad you mentioned it. I'm going to do that right now. I'll hit you back and let you know if that was my problem.

1973 Road Runner 360 LA 60 over 340 X heads (fresh) Erson Cam 480 lift 292 duration 107ctr Edlebrock RPM Performer AIR MAX 7576 (NEW) Holley 750 Dual feed Single pump Vacuum Secondaries Elec Choke (New) Here's the issue-Carburation Radical - (extremely sensitive) pedal. Quick response and the...

SIR, I did just that and fired right up-Sorry it took this winding trail for me to comprehend and thank you for hanging in there with me. Greatly Appreciate your Knowledge and HELP- Talk you soon. Be Safe BEST, JACKSON

Confused-With MSD distributor #1 is at the 3 o'clock position facing the engine from the radiator. How to get to the normal factory position TDC #1?

TY so much-She finally started-having a bit of a fluctuating idling issue but I haven't tried your latest recommendation either. Tomorrow I will start again and follow through. I was able to take her for about a mile run and with all my Hi Pro upgrades she is unbelievably fast-I live in the...

This is what my distributor gear looks like how do I line this up?