Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Gen 3 Mitymounts with adapters to a 68-70 B body, probably works with other years. Never used.
Selling because plans changed and I needed solid mounts.
Yup, that’s ok. Mike (Goon) busts my balls every chance he gets. I am just as indecisive, if not worse than he is.
Now back to supercharger and supercharger accessory talk.
I am personally running twins for my build but if I could turn back time I would have gone procharger. The simplicity of...
Thanks
Fronts are 18x8 and rears are 19x12, Ill have to look up the backspacing but the rear is a lot more than you could fit on a factory width rear end.
Didn't like how the rear suspension was supported by the old shock cross member so the old got replaced with a beefy new one. I had my buddy cut me these parts on his burning table and I welded them up.
Suspension is just about all mocked up and it's time to fit the engine and trans.
Somehow your coil is getting power even with switch off, trace back your coil wire and see if it's not connected to the right place or is in contact with another wire.
Got the rear almost in, waiting on some back ordered parts and some special brackets for upper shock mount for the rear. I didn't like how the uppers were supported by the old crossmember. Building a ridgid mount for them that will be taking the place of the old cross member.
The front is...
I know this has been covered a hundred times but I've read a few different answers so I want to be certain. The engine offset in a 68 RR is 1 1/4" to passenger side correct? Need to make sure my fabbed 9 will have the pinion centered correct.
Well I have slowly been pick away at small things after all the major rust repair was done, been very busy. I have most of my drivetrain sorted out and welded in US car tools goodies. Going to start with the magnum force pieces now. For the rear coilover mounts, the magnum force kit uses the old...
Mine looks almost identical but it's a track bar setup. My upper shock crossmember was replaced at some point by someone with no welding or grinding skills. I thought for some reason that the kit came with a new upper crossmember (A-body video) to mount the coilovers so i never bothered...