Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Selling my 1966 Plymouth Satellite. Have owned car for four years. Have put less then 1000 miles on vehicle since purchase. Motor was rebuilt right before I purchased.
440 (450 hp) 727 transmission,10:1 compression,
Holley 880 double pumper, 17 inch Boyd Coddington rims, no rust, nice...
Ok so after returning the tach and getting a new one, then install new voltage regulator and ballast it still didn't work. Put a new ground on the alternator still no luck. Took it over my buddies house and tried it on his 69 GTX with a 440 and his 67 Charger with a 383. Hooked it to negative...
I have used the following with pretty good results. The one with the lead cannot be used if you have an 02 sensor and a catalytic converter. The stuff they sell in the auto parts stores are junk. If you read close it will tell you that it raises octane usually 3 points. So if you put this stuff...
Not sure about the ignition, just looks like a regular electronic ignition to me. I also thought it could be the ground. Hooked the ground wire directly to the battery. I checked the switch four times. tried it on 4, 6, and 8 cylinders
I live smack dab in between New Orleans and Baton Rouge, so for us to vacation where a theme park is it takes us 8-10 hour drive. Atlanta--7 hours, Dallas, 9 hours, St Louis 10 hours, S Carolina/N Carolina boarder(Carowinds) 8 hours, Disney 19 hours, etc. Once the new Houston Park is built that...
https://m.youtube.com/watch?v=GIytNxPZ_SE
https://m.youtube.com/watch?v=fgljMa0WDgU
So the wife got me a tach for Christmas. Figure this will be easy, four wires. Black for ground, red for power, white for light, green for signal. Instructions say to hook green to negative on coil. Hook it...
Good news!!! I put a new oil pump on, put the priming tool in my drill and I had pressure. Put everything back together and I have 40 psi on idle. Everything sounds good. Thanks for the help
No leaks. The shaft and gear are tight. I use 15/40. My neighbor and I looked at the prv and it looked good. The spring was in one piece. I bought a new pump and will install that as soon as I get time. I also have the car up on jack stands ready to pull the oil pan if needed. I dropped the...
Jimw, Sweet car, what color is it? I really don't know the answer to your question, I don't keep track. Thanks for looking, Brian
Thank you The color is steel gray