Search results for query: *

exactly, more resistance is what I am looking for as well.

1970 Superbee, previous owner had the steering box changed right before I bought the car, and the steering is extremely loose. With the car running, parked you can turn the wheel with one finger with zero effort, and if you use some effort it will spin all the way, the wheel responds immedietly...

dont see anything taped up, it may be low I have not had time to deal with it yet.

Hi, I have a 1970 Superbee w/ the 383, has factory A/C, its all there and hooked up but it does not seem to come on. I see one wire coming off the back of the compressor that looks like its tied into another wire then disappears into the wire look. I was wondering if someone had a wiring...

**Update** Well the weather finally cleared up and I had some time to get over to the car and work on it... The rubber fuel lines were all dry rotted and or cracked, the one right off of the carb had a large crack in it. I changed the fuel lines, fuel filter, voltage regulator and the coil. Now...

the lines dont look wet and i dont smell any fuel

its been in storage for 2 months, i did not put anything in it since it wont be there very long. I have no idea if the coil is getting full voltage, might just pick up a new one and see how that goes..

thanks for the response, since it just snowed here I wont be able to take the car out and drive it enough, I have not taken the air cleaner off and looked at the carb enough to see if the cross over is blocked or not, honestly I am not exactly sure what I am looking for in that case. I believe...

the wires are taylor and look new, everything looks good under the hood. I also noticed when I went to storage to start it that it took a few cranks to get it going as usual since its been sitting and when i gave it some gas and brought the idle up to about 1500-2000 the whole car would shake...

this is a new problem, it only just started recently, I did not make any repairs or upgrades, it just started to do this on its own.

I believe the carb and intake are stock, I know it has headers and an exhaust, I will get over to the car as soon as I can and see what it has for an ignition.. thanks for the all of the fast replies.

Hi, I have a 1970 SuperBee w/ the 383 motor, after the car sits for a while and I go to start it, it starts up after a few cranks, but after I drive it and it warms up and then I park it, and go to start it again it just cranks and cranks and cranks then finally kicks in and starts, everyonce...