Search results for query: *

Last year I lost park but only about 80% of the time I did. So I went down the rabbit hole of reasons why and one thing after another I have tried what I thought of everything and here is why I am not deferring to the hive mind for help! I have attached some photos and a list of what I have...

So I have had a super regular AFR since I got my last tune all set up in my car. Until last night….I usually Only worry about it mostly when I am hot rodding around or making a pass with my car but I always keep an eye on it just like it‘s oil pressure because if you have it why not. So...

So I have burned the #5 plug wire a couple times now. The first time I thought it was routed too tight to the headers, so I did another set looser and boom still smoked one. I'm using a slide on plug wire protector but it doesn't seem to be shielding very well. Either JEGS or summit brand...

I am asking the hive mind when do we switch the distributor, coil, and ecm box out? I have an accel super Coil, MSD 6AL and proform dizzy, accel Ceramic plug wires. do I upgrade the dizzy now? It starts, runs and pulls pretty decent for a driver. The coil/ rotor in the photo have about 1000...

I am looking at entering my A12 in to Hot Rod/Motortrend Drag week 2020 since it's all Midwest and I happen to have a decent amount of time off accumulated. I have Edelbrock Victor heads, they are not reported as Billet, however the Drag week rules for Street cars forbid them ( and a few other...

I was at Roadkill Nights in Pontiac MI and they had a chassis dyno. I was strapped in and made a few pulls and feel like something isn't right with this. A fresh build 440, 30 over, Hughes cam, forged pistons, alum heads with 84cc chambers, 1.6 ratio dbl roller rockers, msd ing, M1 single...

ive had a fight and a half with my car and this is the last hurtle. We event to crank it over to check oil pressure and oil it up before start and there is 0 electrical. We did have to replace a few wires that there brittle or corroded. Here's the info I have tried so far... 1)New battery...

so I blew a motor with less than an hour on it. So all my stuff is near mint and sized for each bore, and as we all know lifters should be kept to their lobe on the cam. I looked all over and haven't been able to find what I needed so I talked to a guy I know and we created a cad program to...

i have been searching up and down for weeks for this thing in the car and online with nothing but old info to go off of. Unfortunately the Walter P Chrysler Museum is closed. So the shining light for me to get a broadcast sheet is pretty dim. Is there a place that I can contact to see if...

This is going to be a long tail of the car that has been known to be called The Fumble bee. I wish this could be a pure stock car but it is well beyond that. I am looking to make this a fun car and just do a lot of burnouts and have fun with it now. The base info that we had was that it was...

I tore my blown motor out and need a new torque converter ... Well maybe unless someone knows what the slip is on this. I don't have any idea or seen any other marks on it. It's a 727 and mated to a 440.

I have a block I am putting together and I have 3830949 and 3698444-1 intake, what to use? It's going on a 65 440 block that is replacing the non-org 440 in my superbee that gernaded the motor last fall. I know I could pull the one off the block in the car, but I want to do a quick swap.

I bought this car about 3 weeks ago and had to tow it home... The owner said "it ran when parked". Of course it didn't start. I got it home and went to work. I tested the old msd 6a box no spark per the tests msd said. Now it has a new 6al box and produced spark at the coil. No spark at the...

Hey FBBO, I'm here for a few reasons but the main one is I have a 1969 Dodge Superbee with a 440. It has the 6pack hood but it's a 4 barrel holly now. The build sheet and fender tag are not with the car so who knows what it really is. The title has it listed as a superbee so I'm sure it's...