Search results for query: *

Does anyone have a lifter box they are willing to part with? I'm going to freshen up my engine and reuse the cam and lifters but have no box....For a 440 with hydraulic lifters.

After much trial and error and returned parts the answer to my question is: Upper is Gates 20370 Lower is Continental C70438

I did a swap in my 1972 Satellite from a 318 to a 440 and looking for radiator hose part numbers. It was a 318 car with AC and I am reusing that 26" radiator. The lower hose is passenger's side discharge, the upper is driver's side.

Just waiting for everything to come back from the machine shop. 440 10:1 .030 over (six pack short block) 452 RV heads with 2.14/1.81 valves. Stock HP exhaust manifolds Holley 850 vacuum secondary (80531) 3.55 suregrip.

I'll take it!

Any color will work.

Bronze is preferred but any will do

Looking for the plastic trim piece that screws to the bottom of the steering column that is called a trough #19-14-49

Will the stock retainers work?

Rumblefish, you just triggered my memory. Years ago the A block 3412068 spring would be used with the .474-.509 cams in a big block as a replacement for the 933 because you did not have to machine the heads....and that is what I was trying to find/remember...thx!

Did you have to machine your heads for the springs?

Thanks Lucky71!

Mopar Performance MOPP4452993AE

Any run a 474 cam? I am considering buying one but can't find info on springs anywhere.

Does this use a standard Pitman arm?

The sockets are pretty bad and will need replaced, I did the jumper wire and the problem corrected and the bulb brightness was much better.

No changes/repairs on a 72 Satellite.

When I turn my right turn signal on both tail lights flash, everything else is functioning correctly....thoughts?

Ever figure it out?

Thank you, I found one very loose ground already. When/if I find the problem I'll post a follow up.