Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1986 I was 22 at the time I started building the house I still live in here on the farm
Went to the bank and borrowed $40k and ended up going back to get $10k more so $50k all together
2500 sq ft home
That is the wire harness that turns the interior lights on when you open the doors The dome light The map light and the side lights on the console all come on at the same time
We have an electric in our household too ( not a mopar :( )
Think you will enjoy it very much since you have taken the step to try an electric one
After you drive it a while you will notice the fuel savings
We are coming up to 70 000km on ours and I figure I have already saved $10 000 on gas...
The small tube on the filler neck ( the filler neck that mounts up inside the 1/4 panel ) is the gas tank vent line It will usually have a metal line clipped tot he side that follows the neck down to the trunk floor then goes through it's own hole to vent inside the rear frame rail
Well since this is going very badly I will say it
That is a 69 shifter in the picture
( earlier ones had the place to mount the little switch on the side for the reverse lights and this one does not )
The 1971 72 Chargers have the side window swoop up to the top of the roof vs the 73 74 Chargers where the window is longer at the bottom
Also on the 71 72 cars the doors are taller on the back edge to meet the shape of the window so 71 72 doors will not fit 73 74 cars
Think this one qualifies
Says one owner but he did not buy it new so I would think that means at least 2 owners ......
Car is still half apart
He wants $ 135 000 Canadian
1969 CHARGER R/T ONE OWNER CAR ,TRY FINDING ANOTHER ONE 4 SPEED | Classic Cars | City of Toronto | Free local...
OK I am back
Just was not sure what what numbers to use
From math class volume is PIE R times R times height
Factory bore of 4.320 and stroke of 3.75
22/7 times 2.16 times 2.16 times 3.75 works out to 54.98 per cylinder times 8 gives 439.89
At 30 thousands over is 4.35
22/7 times 2.175...
Trying to figure out what the new cubic inch a 440 engine would be if it was 30 thousand over
Does 30 thousands mean they took that much off each side so the diameter is 60 thousand wider or does it mean they took 15 thousand off each side and the diameter is 30 thousand wider ?
But the way it sits right now is the lowest of low value in that car's life If he can finish what he started he should
If he is just burnt out from working on it he should just pack it away and come back to it later when he has more gusto to work on it
I bought a 70 that was from an estate sale almost 10 years ago now
Totally apart sitting on jack stands with nothing bolted on but all the new metal welded on
Former owner died of cancer so no one to ask any questions
Been working on it for the last three years in my spare time and finally back...
Kind of an od description
Seller's description
1968 Dodge Charger, last registered in 1994.440 EngineCar comes with a trailer, will upload a picture of the trailer later this week.Will not respond to "Is this still available?" if the ad is up, the car is for sale.
Looks good in the pictures but...
If the shop you are considering that is out of state why do they need to find cars to work on so far away ??
If they are any good all the local guys would have them well booked up
You need to find a place close to home to be able to check in on your car on a regular basis
I have only sent one...