• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Users: JerseyJoe
  • Content: Threads
  • Order by date
  1. JerseyJoe

    Check my carb tune please?

    I have a BLP 850 on a 493" RB stroker. On the highway (50-70 mph/2500-3000rpm) and WOT the AFR's are right where they should be, mid 13's and mid 12's. Idle and light throttle on the other hand are very rich. I can get it to idle at 13 to 13.5 but the idle screws are only 1/2 to 3/4 turns out...
  2. JerseyJoe

    Ignition causing "carb issue"?

    Put a Thumper Carb on my 493/4 speed Charger in the Spring and it ran like an absolute beast. Idled nice at 13.8 AFR, WOT was 12.3-12.5, cruised at 13.0. Fuel pressure is 6 psi as recommended by Thumper. Driving back to the hotel at Carlisle last month, I noticed the AFR was dropping into the...
  3. JerseyJoe

    More '70 Charger headlight relay weirdness

    I've recently installed the plug and play relay harness, and I'm having issues similar to Kern Dog's. After hunting around with wiring diagram in hand, it's working properly with the high beams selected BUT the brake warning light on the dash just barely glows... In low beam the headlight doors...
  4. JerseyJoe

    Thoughts on my r134a pressure?

    Before I evacuate the system and start fresh, can anyone comment on my compressor seeming to cycle on and off so much? Vintage Air recommends 6-18 psi steady. https://www.vintageair.com/tech-topic-troubleshoot-system/#:~:text=Acceptable operating pressure ranges for,PSI in a steady state...
  5. JerseyJoe

    FlowKooler swap

    I'm not attempting to bash anybody trying to bring innovation to the hobby, I just took some pics of something I noticed while swapping pumps last night. The FlowKooler I got a couple weeks ago is just a GMB aluminum housing (even says on the snout) with the FK impeller. I've seen that a lot of...
  6. JerseyJoe

    "New" old drill press for my garage.

    I have a problem. I can't resist old tools. Even ones I know I'll never use. I'll definitely use this one. My neighbor is in his 80's and is moving to a small apartment, and asked me if I could use this. It works great but I'll clean it up a little bit. Gonna get the numbers off it but I think...
  7. JerseyJoe

    Hello from Jersey

    Been lurking here for years. Lockdown has me on the internet more so I thought I'd make it official :thumbsup: Here's my '70 Charger 500. It's a 493/4sp/Dana, my socks match more than the #'s on this car. Bought it as a rusted hulk 15 years ago and just got it on the road in 2018. I did pretty...
Back
Top