• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. duster731

    Just picked up 1966 Belvedere II

    Ua tell me about it lol.. there was a dime size hole where the weld was no wonder why there was a exhaust leak
  2. duster731

    What Engine and Trans do i have??

    Does anyone know the yr of the dokata he needs the starter from to work on his bb or what specs does he need to say to oreilly
  3. duster731

    Just picked up 1966 Belvedere II

    Kool thanks found out the problem was the dist... We replaced it and now it fires right up
  4. duster731

    Sure grip...clutch type

    When I did my clutch type s.g I used synthetic and the more you drive it the better it gets it was bad but now its not noticeable at all..... Some one once told me to go into a wide open space and do figure 8 turns at about 10 mph or so it helps the clutches break in do it about 3-4 times.... It...
  5. duster731

    the financial help thread

    True but heres a quote from a fellow a body member
  6. duster731

    Just picked up 1966 Belvedere II

    Get some recent pics up on here before I do lol
  7. duster731

    Was running 30mins ago Now No Spark??

    Awesome now drive it over and return my coil lol
  8. duster731

    Was running 30mins ago Now No Spark??

    Ok I have a feeling its a bad coil or dist more than likely the coil... We replaced the b resister and its only hot when key is off.... The coil is hot when key is on and off, we also checked all wires, grounds, connections, and cleaned em.... So how can we make sure that the coil is bad...
  9. duster731

    the financial help thread

    Wow thanks for all of the tips and info guys..... Hope it helped others too and not just me
  10. duster731

    Just picked up 1966 Belvedere II

    The altenator is good before we fired up the beast we took it down to kragen and it passed .... also replaced the ballast resister cause SOMEONE over tighten it and broke it lol ..... I think its a short but have no idea where it has a new battery new ground cable, we sprayed down all of the...
  11. duster731

    Just picked up 1966 Belvedere II

    Here's a vid of the first start up open headers https://www.youtube.com/watch?v=eDCIFr2KNLY&feature=youtube_gdata_player
  12. duster731

    Just picked up 1966 Belvedere II

    also he added a 750 eddy carb...... And made a nice video..... Wheres the vid dennis
  13. duster731

    the financial help thread

    Since there are a lot of experiance poeple on here that can provide tips and help to those that are suffering or having hard times right now money wise ld like to make this thread so that way we can ask questions,tips, etc on how to manage are money and save to be succesfull in life.. Many...
  14. duster731

    Small block stroker or Big block swap???

    sb 360 stroker can easily do 11s with the right set up
  15. duster731

    318

    yup my 318 now ran 14.8 but when i add my 650 holley dp, casting 302 heads fully ported 188-160 valves, comp cam xe268, and a single plane it should be in the 13s then a 125 shot should be 12s
  16. duster731

    318 coolant

    yes
  17. duster731

    What is tallest intake that fits under the hood?

    my buddy is running a torker single plane on top of a 383 with a edel air cleaner and ut fits just fine under the 66 belvy hood
  18. duster731

    Just picked up 1966 Belvedere II

    so dennis whats the update on this beast i helped you with lol
  19. duster731

    newbie well on b bodies

    thanks guys
Back
Top