Search results for query: *

Looking to buy a restored heater box for my 1966 Belvedere,or possibly a place to send it to have it refurbished.

So I had this great idea to have new 383 built for my road runner so I could save the numbers matching motor for when I die and the wife sells all my stuff she can say here is the original numbers matching motor,This was 2 1/2 years ago. The 1st candidate for the project was a 1970 short block...

Looking for recomendations for valve covers that will clear Harland Sharp roller rockers.I have stock AMD covers and they hit the rockers.The heads are cast iron 906s.

Need some pictures of a 66 B body interior fire wall.I have the dash out and am going to start putting it back together(1966 Belvedere)I did not take any pics and have the brake pedal assembly ready to go back in and I have 2 wire harness brackets and I forgot where they go,any pictures would be...

Changing the single pot master cylinder to a dual pot in the 66 Belvedere and I am planning on using the original push rod but the return spring was broken in 2 places.Anybody know where I can get a new one?

Has anybody ever heard that on the front of the secondary hood latch there are 4 numbers stamped that are supposed to be the build date of the car,I have no build sheet or fender tag for my car so can any of you with a known build date for your car check this out for me.2788 is stamped on my...

Power steering return check valve I guess is what its called.1966 Belvedere 11.this is the 5/8" return hose connects to this.am haveing a hard time trying to find one.Thanks

Just got a 20 gallon parts cleaner and was wondering what to use.What works best,I dont want some water based crap that is really not that effective,I saw CRC in a 5 gallon can at Advanced auto for $105.00 .does any body have any experiance with this one,and do they make a water based that works.

Putting my rear back together and decided to run a tap thru the axle mounting nuts because they wouldnt thread up by hand.Did I ruin these nuts?are they supposed to be like the ones that are egged a little so they wont back off, If I ruined these can I go to the hardware store and get some with...

Putting the 8 3/4 back together on the 66 belvedere and the new metal gaskets from Felpro have a raised side and a flat side ,How do these go on,I am talking about the gasket that goes in between the housing flange and the brake backing plate.

I have been looking for a 66 or 67 B Body for a couple of years now and pulled the trigger on this one 66 Belevdere,original 383 car,it has A body high back buckets in it now but the guy had the original bench seat but it needs recovering I took it and will probably put that back in it if I cant...

I recently took the A/C compressor and pulleys off my 383 and replaced it with the non A/C pulley with power steering setup,I got a brand new 26" radiator from Glen Ray set up for A/C incase I want to put A/C back in the car,7blade A/C fan and new repo clutch from Tonys Mopar Parts and the...

Went to look t a 66 Belevedere today,The car is a one owner has the original title from 1st owner,lots of work for me but the right person with the room can pick this up for $3,000.00.original 4 speed bucket seat car,said it was a 383 but VIN says it had a 361.al the trim pieces are in the...

I am going to replace my original leaf springs with stock ride height springs from Springs and Things,I do not want to raise the rear ride height but they offer 2 sets 1 is stock ride height 5 leaf and stock ride height 6 leaf for $60.00 more.looking for opinions should I go 5 or 6 leaf.

I have a 60 gal 6 HP devillbiss compressor that my neighbor got for free and passed on to me,after figuring out the belt was loose and an oil change was all that was needed it runs good and shut off at 125psi..but air kept leaking from around where the 1/4" bleed off line attaches to the...

Do any of you road runner guys have the stone shield installed on your cars?I have mine and was going to put it back on,PO had removed it and I was wondering what might change as far as how the air flows thru the radiator.I am installing my new radiator with a 7 blade clutch fan and shroud.Most...

Met up with Klaus tonight at a local cruise.

I am going to have a 727 trans built and would like to know what the best shift kit would be for it,stock 69 rr 383 with 323 gear,planning on changing to 355,need to keep it a non manual VB since i have a column shift.thanks

I replaced my turn signal switch about a year ago with a part I bought from Herbs for $75.00,now it seems that when the turn signal cancels it does not go back to a solid center position on a left hand turn and then the brake light does not work unless I move it to center,also if I move it...

Heres what I got going on.Stock 69 383 HP,I just replaced the stock cast iron manifold with a Weiand dual plane aluminum one that looks like the stock one,brand new Edelbrock 1406 carburator.I installed the manifold and carb,it seemed to run fine right out of the box but I didnt fool with it to...