Search results for query: *

I’m driving our 64 Polara from near Boston! Last year I drove it to Carlisle, I figured this year, why not go to OH. Anyone along the route I can call if we run into trouble??? Thanks!!

Hey Sonny, What color Red is that? I really like it.

i was digging thru the local boneyard today with my brother looking for a couple things. We came across this rear end in a road runner. Is this a Dana??? I know it is a bad picture, it is buried under a few cars. Are there any tell tale markings/castings? It looks big. Thanks!!

That’s perfect! Thanks guys!! I’ll get an easy out to take out the rest of that broken bolt.

Ive got a rear end housing out of a 68 road runner. I’m not sure what this is, I think it’s a vent but is there supposed to be the brake hose block mounted to this? I wonder if this was a bolt that broke off. You guys have any ideas or maybe even a picture of the completed car you could share?

I knew that you guys would steer me in the right direction. Thanks for the help!!

I’m swapping out the 8 3/4 tapered axel rear end out of my 63 Dodge Polara. I’ve got a rear end out of a 1968 Roar Runner. Problem is it didn’t come with backing plates. Can I re use the backing plates off the 63 dodge diff? If so, what drums should I get? Thanks a lot guys!!

No kidding! Are you driving something old down? We're heading down Thursday morning from the Taunton area. I'm driving the 64, and my brother will be trailering his 70 Challenger. Not because it's too perfect to make the trip, but because it might not make it under it's own power! Haha.

I'm driving the 64 Dodge more door this year 425 miles from Massachusetts to be there! Don't forget about the Quarter Aces drag night that Friday. Always awesome to see all the old Mopars doing what they were made to do

We'll be there! I think seeing the old Mopars rip down the drag strip as they were built to do is the best part of the Chrysler weekend!!! I'll be driving the 64 Dodge from Massachusetts this year! I'll even take a few passes with it. 2 barrel 318 with steep gears..... might be in the high...

Thanks! I think that's the only route. I'll also have to cut the rear foot wells out as well to sneak it in from underneath.

I need to replace the drivers floor in my 63 Polara 4 door. I am thinking about buying the one piece AMD floor, but I'm not sure I can squeeze it in whole. Has anyone put a one piece floor in without cutting the floor pan in half first? I don't see how's it's possible to get it through the...

Going to drive it 350 miles to Carlisle PA next Summer.

Glen, Nicely documented. I've got a 63 polara with a Poly. I'm going to swap out that engine for a 413 as well. Sounds like my C body oil might might fit afterall. Not sure of the number on the pan... What about the torsion bars? Did you reuse the 318 ones? I was thinking I'd need to...

Hello, I'm looking for a pair of 15 inch steel wheels for the rear of my 64 dodge Polara (big bolt pattern). I'd rather not go with the police wheels, just the regular steelies. Thanks!!!!

UPDATE: I Bought A Pair Of Cheap Summit Glasspacks. They Are ReAlly Short, Like 12 Inches. ONLY Problem Was The Pipe In The Middle Was Full Of Louvers. I've Read That This Cuts Down On Flow Drasticly. So I drilled 30 Or So 1/4 Inch Holes In My Tail Pipe, And Cut The Outer Shell Off The Glass...

I picked up some short glass packs, and put them next to the gas tank in the tailpipe sections. The drone is gone! and when you rev it up it still sounds great. Thanks To All!

Thanks For Sharing That Link. What A Great Marketing Tool. My Question Is Should I Put The Glass Packs Upstream Or Down Stream Of The Flowmasters?

The Dynamat In The Rear, And The Trunk/Back Seat Baffle Only Cut Down On The Drone Slightly... What Do You Guys think About Me adding Short Glasspacks In Front Of The flowmasters? That's Gotta Help With The Drone, Right?

Getting Back To The Original Point.... I Took Out The Back Seat. I Notice That The Floors Under The Back Seats Were Very "tin'y", Which Are Right Over The Flowmasters. I Loaded Up Those Floors With Dynamat. Also, I Made A Styrofoam And Fiberglass Insulation Sandwich Between The Rear Seat...