Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Ok....tapered it is. As mentioned I'd do it either way.
Pretty sure it's an axle bearing, previous owner had adjusted them ( without
pulling and cleaning/packing them ) to "zero" or less end play. I backed the adjuster
off to about .010 freeplay and noted the one side leaking. Noise...
As pointed out this is a driver...nothing special. I don't have any issues doing it either way. The setup I
linked above just seems cleaner/easier and maybe less likely to leak in the future.
Was asking to see if maybe was overlooking something.
Didn't know ( new here ) that it was going to be a...
Have a 66 Belvedere "driver" that's got a bit of a growl from rear axle
bearings and the right side has a slight leak. Any good reason not to
ditch the stock setup and switch to something like this...