Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thanks, Gunner.
I'm guessing I'll have to get it certified before
I can get the truck titled. DMV here is kinda
quirky. They're probably going to have
reservations being it's "home built".
They have a mindset of home builders
not being able to weld on a professional
level.
There's a reason for...
A big thanks, Budnicks.
I don't think this truck is going to do
much better than 12's. It's not titled
yet, and hasn't been run on the street
more than a couple times around the block.
Haven't really had a chance to dial it in.
The tube frame was jigged and welded
in our shop on a layout table...
Thanks, padam.
I will be sure to pick one of these up.
It's going to be a few weeks yet, as there
is no glass installed in the cab yet.
I've checked out NHRA's website. Seems
straight forward enough.
I've been to Roswells' track on a number
of occasions, but only as a spectator.
Looking forward...
Bearman,
I've been to Mesa a few times engineering/
testing AC systems. Lordy, it's hot there.
Most of what I helped design was on the
RTS side. Also spent a lot of time in
Carlsbad (NM) at their test track.
Hello all,
Hard to explain this one as it started out as a
design project between a couple mechanical
engineers, and morphed into something that
my disabled veteran son has shown a great
interest in. He suffers from PTSD and a TBI.
26 Years ago we as designers of motor
coaches thought it would...
Ran dyneema 10,000 lb rope on a winch for years.
The only upkeep is to rinse in hot soapy water
about once every six months to wash the
dirt out of it. Also be very careful and not
pull over any sharp edges. You'll also like
the manageability and light weight.
Forgot to mention that its best to...