• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Aron Gleason

    440 runs perfect for 5 seconds, then starts missing. Every time. Help.

    With a coil mounted sideways, if it's oil filled it can leak out over time.
  3. Aron Gleason

    Quiet electric fuel pump?

    I run the holley black pump. I ran a dead head system for many years, and it was loud. After changing it to a return system, the pump is quieter.
  4. Aron Gleason

    Quiet electric fuel pump?

    A louder exhaust might make the pump quieter lol
  5. Aron Gleason

    440 water jacket bolt holes on 906 heads

    Thank you to everyone that responded
  6. Aron Gleason

    440 water jacket bolt holes on 906 heads

    What is the best sealant to use on the end bolts on a 906 head? And would I be ok, if I remove 1 bolt at a time without having to replace the header gasket?
  8. Aron Gleason

    Valve cover gaskets 440 cork or rubber or something else?

    I use the thick rubber gaskets, but I also have studs to keep the gaskets in place. And I put mine on dry.
  9. Aron Gleason

    Here ya go...

    Ouch. That looks like he landed pretty hard lol
  10. Aron Gleason

    Cleaning a battery top

    Maybe some solvent and emery cloth
  11. Aron Gleason

    Light bulb

    Does the steering wheel have to come off in order to replace the shift indicator bulb on a 67 coronet?
  12. Aron Gleason

    1965 Coronet left rear wheel/drum gets VERY hot after brake job.

    get a new mechanic. He shouldn't be working on cars if he thinks it's hot for brakes to get hot.
  14. Aron Gleason

    Bare block protection?

    Gibbs Lubricant will do the job
  15. Aron Gleason

    If you could only do one...

    Heads would be a good upgrade without having to rebuild the bottom end by stroking it.
  16. Aron Gleason

    Newer Indy Cast Aluminum Wedge Valve Cover Finish

    Couldn't you sand the covers down and use high heat paint? I would think you could make those covers look really nice with little effort.
  17. Aron Gleason

    Timing seems off, vacuum super low

    You're welcome
  18. Aron Gleason

    Timing seems off, vacuum super low

    With the mixture screws turned out 2 full turns. I'd check where the throttle blades are in relation to the transfer slots under the carburetor. You shouldn't need more then 1.5 turns at the most.
  20. Aron Gleason

    Newer Indy Cast Aluminum Wedge Valve Cover Finish

    I'm sure they're the older covers. Not too much work went into them.
  21. Aron Gleason

    Newer Indy Cast Aluminum Wedge Valve Cover Finish

    I bought some indy valve covers. Sanded them down, and used gloss back vht paint. Then then lightly sanded the letters to give them some shine. Turned out pretty good.
  22. Aron Gleason

    Hydraulic cam

    Good advice. I have heard of the 128 rule. I'll have to watch that video.
  23. Aron Gleason

    Hydraulic cam

    Good information. That's what the machinist told me 30 years ago when the motor was built.
  24. Aron Gleason

    Hydraulic cam

    Thank you for the information
Back
Top