Search results for query: *

Wasn't there one in this section? Check back a page or two and you might see the ad. I didn't check it out,so I don't know if it was an original(or A&A) piece for MW ports or one for the standard ports. Good luck!

Sounds like the best one out here. Egge Machine is doing pistons(albeit,cast ones),Weiand intakes pop up here,Evilbay and on other Mopar sites and the H.A.M.B.,and I think even Offenhauser made intakes for them that occasionally surface. I've thought about taking mine apart-what;like I need to...

That's the third one out here;SOMEBODY must need one-or three. Not a bad mill,and s-l-o-w-l-y there's an aftermarket building some stuff for them.

SOLD! SOLD! SOLD! Thanks,J.

Rusty;probably about 800 miles or so...sorry,man. There's another one in the Parts and Cars section;just a motor though. Addy is listed as Greenville,which I'm presuming is N.C. There's a Greenville,Michigan,but I don't think that's it. Furious 64 is the seller. Good Luck! -Al

Have a complete 318 Poly motor and trans that came from my '64 Sport Fury. Mill is a 2-bbl,complete carb to pan,will need a rebuild. Doesn't turn,but I think it's just from sitting as opposed to breakage. Trans is complete but will need a rebuild as well. Really want my garage space back that...

SOLD! M-P Stage III Head(New Casting,-518M) For Sale/Trade for StageV(B) Piece Have a bare Stage III(-518M) head,with seats for 2.14"/1.81" valves for sale or trade. Unused casting,never milled or modified,production cast-iron guides,some surface rust from sitting around here. Asking $350.00 or...

M-P92;I have an Indy Cylinder Heads dual plane,for standard port heads,if that might fit your application. Taller intake;more so than Torkers,Torker IIs,Street Dominators an the like. Asking 150.00 plus the insured ride(I'll cover any insurance). I also have two Edelbrock Torkers;one for EGR,one...

Zach;I know there's an install thread here somewhere with some good advice-I need to find it.

GOT 'EM!!! Thanks Montclaire!:headbang::headbang::headbang:

...On the way! Part of the "Winter projects" list. Said list is growing. Something tells me that I might pull the car off the road sooner than originally planned. Let's see...there's the wiring repairs,frame connectors,ratchet shifter install,more wiring repair,the electronic ignition...

Informational question: Were the carb openings cut out,or did some come that way? Years ago,I had date-coded 1962,-3,and -4 cross-rams. Each had the 4-hole configuration;the -62 had the smaller primaries,the other two(an April 63 and December 63) had the equal-sized openings. If it came...

Montclaire;I'm very interested in these;getting them from you to me(in Michigan) is the issue.

Are these the type that follow the contours of the floor(no cutting)?

Henry;you've got a PM. -Al

Henry;big or small-block? I may be interested. Thanks!

Mark;any other specs(duration,centerline/overlap) on this cam? I might be interested. Also;1-bolt or 3-bolt? Thanks!

Been doing some research on this. Seems this may be the Mopar 1990's era reproduction of the Stage III Max Wedge head. Hence the 2406518 casting number. My Mopar B-RB book lists this as part number 5249824. NOT a legal NHRA replacement. The head I'm looking for is the standard port Stage V...

Just picked up a pair of Stage V heads;looking to trade the one with Max Wedge size ports for an uncut standard port Stage V head. Some pics: Minimal rust on deck surface and in chambers;these have not been milled. Look to be set up for 2.14/1.81" valves(or are they...

Jay;I'll keep my eyes open down here. I check Detroit and local CL listings a lot;there might even be one there now. I can do a checkout and pickup for ya if one is found. -Al BTW;my lil' 413 really likes the regular Performer,with a 750 Holley(vac. sec.) and a 1/2" spacer. Makes the way it...