Search results for query: *

One more pic for good luck.

Perfect! Thank you. :thumbsup:

Does anyone have a closeup pic of the correct screws for the taillight cover in a 69 charger? I might assume that a 70 may be the same.

https://www.napaonline.com/en/p/NAFRTU1GAL?impressionRank=9 This is what Bob recommends for the copper / brass radiators.

Yes, you are missing the clips (J nuts) that attach to the quarter panels. R/T specialties sells them

Well that answers my question. Thank you everyone who responded!

Thank you for the pics! Do you happen to know what plant your car is from?

I am looking for some pics of any charger jack instruction factory locations on the decklid underside. TIA :thankyou:

Yes, It is tough to tell if it an original or not. I really do appreciate the pics and the effort. :thumbsup:

Even if you can find fragments of the stampings it would be greatly appreciated!

The markings would be across the center in about 1" high letters. They would be hard to miss. Thank you for looking! :thumbsup:

Does anyone have pics of the backside of an original trunk mat? specifically the date code markings? any help would be appreciated!

Does anyone have a picture or two of the vacuum fitting on a survivor or original 68 or 69 charger with A/C and no power brakes???

Ok this is confusing.. my build sheet shows an "86" under vac fitting, 2863486 according to the parts book, That is a single 1/8" fitting. My question is where does the 1/4" headlight hose attach to then?, the carb itself?. does anyone have a reference car (69 Charger) that has the correct...

Hello?? :popcorn2:

Ok this is confusing.. my build sheet shows an "86" under vac fitting, 2863486 according to the parts book, That is a single 1/8" fitting. My question is where does the 1/4" headlight hose attach to then?, the carb itself?. does anyone have a reference car that has the correct fitting setup?

Checked the build sheet and it has an 86 for the vacuum fitting. Thanks for the help.

I'm putting my 69 charger 440 back together and need some info on the correct vacuum fitting for a Charger with no power brakes and with A/C ( the 1/4" line for the headlight hose and 1/8" for the A/C system feed). I need a 2 port fitting with a 1/4" and 1/8" ports. I am not finding that...

Yes, QOTHL also responded. Revised.... Thank you both! :thumbsup:

Great! Got holes drilled and hoses installed. Thank you everyone for the help!:thumbsup::thankyou: