• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. R

    WTB: headlight switch bezel and push rod

    Looking for a headlight switch bezel and push rod for a 74rr rallye dash
  2. R

    At wits end

    Problem solved, guess I was overthinking this one, added a ground strap to the ignition module, that was it, I want to thank everyone who chimed in you guys are great!!!
  3. R

    At wits end

    I have spark at all plugs, but seems weak(orange spark), I don't think it's hot enough, what would cause weak spark, I have replaced wires,dist cap,rotor,coil,ignition module,voltage regulator,plugs
  4. R

    At wits end

    Got headers was gonna try new wires net, but the way it's running it would have to be more than a couple wires
  5. R

    At wits end

    I appreciate the input , but think you're on the wrong track car was running fine then **** the bed something happened and happened quickly, have fuel have spark have air but runs like crap as though it's not running on all cylinders don't think it's fuel don't thinks its air but I do think...
  6. R

    At wits end

    Plugs are black and wet
  7. R

    At wits end

    In running stock ignition module stock distributor everything's basically stock. I don't mean any respect here but none of these solutions seem to be on the right track
  8. R

    At wits end

    Here's what I did today changed coil no change pulled valve covers to check valve train its okay compression check 150 all cylinders I am convinced it's electrical thinking about harness from ignition module to coil and distributor must be a breakdown somewhere there how can I test to see if...
  9. R

    At wits end

    I have a new accel coil, new distributor,cap,rotor swapped all with original just to be sure, same problem. question I have is when I put timing light on each wire only 3 out of 8 are strobeing the others don't.
  10. R

    At wits end

    this developed soo quickly, I ran the car at idle for a little while did a couple runs up and down the street everything was running great, started on a little drive and after @ 20 minutes or so it stared a little pop thru the carb when I accelerated, by the the time I got to my destination it...
  11. R

    At wits end

    changed module today no change, next step is to check compression and go from there, very frustrating because I just re built the motor a few months ago and has no street miles on it, beginning to think something bad is going on.
  12. R

    At wits end

    New coil since day one after rebuild had aSlight hesitation upon acceleration as well as a little pop thru carb changed carb and jets still the same then took for a ride and this developed still running like crap after letting it cool down, gonna go to parts store and get a new ignition module...
  13. R

    At wits end

    It was running fine then start going down hill
  14. R

    At wits end

    Thanks man I really appreciate the support I found this car dying in a field I Vermont big block 4 speed doesn't get any better than that in my book car needed everything when I tell you everything I mean everything floors quarters wheel houses trunk drops rockers firewall fenders I rebuilt the...
  15. R

    At wits end

    Mild build 30over stock cam Holley 850 primary jets 74 secondaries 76 pv 6.5 did not replace module yet parts store was closed will replace tomorrow vacuum was fine @15 timing good, set curb idle to max vacuum, car was running fine so how could any of those settings change and cause the car to...
  16. R

    At wits end

    Everything is new, tried different carb,distributor,new plugs, plug wires, cap, rotor, rebuilt motor was popping thru carb tried to rectify by usual process jets, timing , power valves etc got it running great then took for test ride today ran great for about 20 minutes then started running like...
  17. R

    At wits end

    Already checked out carb everything checks out dizzy okay coil okay at this point of frustration I feel like I should have let it die in the field I found it in 2 year resto nighrmare
  18. R

    At wits end

    Did have the heads done, length is good car ran fine until it got to operating temp and them abruptly took a nose dive
  19. R

    At wits end

    Did that no change, definatley not firing on all cylinders I mean it's barely idling - - - Updated - - - Did that no change, definatley not firing on all cylinders I mean it's barely idling
  20. R

    At wits end

    Newley rebuilt 440 from the get go had popping thru carb on acceleration re jetted carb changed power valve go timing set thought I had it all sorted out went for test ride everything was fine after about 20 minutes started back firing thru carb was barely running limped back to the garage, it...
Back
Top