Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
What radiator are you using a small block or big block rad? The small block rad has the hose in the middle of the top tan, the big block has the upper hose on the passenger side of the rad (top) It is kind of hard to see if there is an indentation (slight curve of a cutout on the top half of...
Bring a flashlight and crawl up under the dash and look up towards the wiper pivots. The seals that go around pivot shafts dry out and leak water down to the carpet, which then leads to rotted out floors due to damp carpet. Passenger side pivot will be a challenge to see because of the heater...
Ok on the sail panel there are 2 plastic clips on either end of the trim piece. Now they look to be the same size as the side body moulding clips. They ARE NOT!!! they are small in width and are not reproduced that I am aware of. I bought a few repops years ago from Joe Suchy and last I heard...
Well sad to say....supposedly NO to the overseas junk we normally get. Here is the box they came in.
Yes I have been victimized so many times on this project its sickening. I know I am not alone when this crap happens.
Well after pulling my hair out on the reason why my doors would not lock, I figured it out. Several years ago I bought Mopar authorized reproduction door handles. They look great and actually have a little more "heft" than the oem ones. So fast forward to the current. I started looking at...
THANK YOU!!!! This makes sense now. I have door closed flush with the quarter panel, I am not doing a "hard close" because I do not have the windlace installed, just rubber door bumpers. Once door is closed it doesn't wiggle in and out, but I will manually trip the catch mechanism once door...
I have all of the trim off my 64 and I am finally in the process of putting things back together. Is there a trick (or sequence) to putting the trim back on? To me it looks like the trim at the top of the windshield and the 2 end pieces which tie into the drip rail look an assembly that needs...
Yes, I have a FSM and I popped the door lock out and the part # (if you want to call it that) is the same as the passenger side door. So on the door lock itself there are (2) holes in the lever that the locking rod attaches to. Initially I had the locking lever rod in the hole at the end of...
I have the door card off and I can see linkages moving and nothing appears to be binding. I did look at the other exterior door lock and on the back side I see that it has "RH" stamped on it to me this means passenger side door. I feel like a 12 yr old here, but the lock knob, you are...
If I lock the door with the key via the outside door lock the interior button drops down to show in theory it is locked. But as soon as you push the exterior door button to test it, the button then unlocks the door as if the lock never "locked" the door. Just a tad frustrating to say the...
I will unhook the lever and swap out the exterior lock. They may have been accidentally swapped side to side over the years . So if I understand things correctly when I put the lock in the door, I need to make sure the lever that is attached to the lock is facing to the rear of the car, and...
Quick question regarding the exterior door locks on a 64 Polara. I can lock the door using the key as it is designed to do. However, when you push the exterior door handle button to test to make sure the door is locked, the door unlocks. Does anyone know if there is a "timing" of the position...
Highly recommend downloading FSM especially if youve never have done this before. You do not want to damage the internal retaining clip that the cable end fits into. Yes I would change any o rings you run across, at least you have a good baseline knowing it should be leak free.
Also once you...
Yes , that is the parking brake cover. There is a shouldered bolt that runs fore to aft. This bolt holds the parking brake cable to the cover. The cover is not super sturdy, pot metalish , so be careful. It looks like someone else has monkeyed with it, due to the 1 odd bolt in the cover.
If...
Steve and Mike.... THANK YOU both for the info.. I was going to check with fastenal, totally forgot about McMaster.. Also the proper terminology for the type of spring.. Goes to show you an old dog can learn a new trick once n awhile.
It blows my mind that evapo rust would have nuked the...