Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
just restored a split bench and installed in my 67' Satellite 2-door and I am missing some small odds and ends. Anyone have these, or know where to get repros of this stuff?
-seat slider release cable, connects left to right slider
-clips that retain back seats brackets on to the lower bench...
I think i have the driveshaft you need, out of ‘67 satellite. with a 360/727, 8-3/4” rear. I’m think trans should be mounted same location regardless of big block or small block. Have you measured yet?
Looking for a single piece of hose for my '67 satellite front defrost vent. everywhere I have seen that sells are kits. Yes I have tried locally at auto parts shops and it is both the wrong kind of hose and they refuse to sell me anything but the entire length.
If you have a length of 2-1/4...
Gentlemen,
Looking for the special square headed screws for the instrument cluster bezel, missing a couple, standard tapered screws were used which of course will crack the plastic. Can send a picture if needed. Black or chrome OK.
Also looking for the plastic trim pc that goes under the...
Looking for a driveshaft between 52-52.5", prefer 9260 u-joint and 727 slip yoke if possible.
Part #'s
2660635
2852162
2852118
2660635
I'm in KY, willing to make a drive if necessary.
Thanks for looking!
Got one of these from a forum member a few years ago, shop had my car and lost the darn thing.
1967 satellite, column shift 727, the orange pointer that clips on the column and points to gear. Rough condition is fine, I can paint it.
Thanks for digging through your stashes,
Andrew