Search results for query: *

Looking for a 8 3/4 adjustable bearing retainer for the passenger side axle.

I am looking for one front parking light for a '68 Coronet. The one that mounts to the front bumper. I will take one with or without the lense.

I am looking for a set of seat belt bolts for a '68 coronet with Bucket Seats. It doesn't need to be a complete set, I will take individual or a couple bolts. I have not been able to find the complete set I removed from my car.

I need both the bolt and the clip. The bolt is only about 3/16 diameter. Smaller than I could find at any local stores. Here’s another picture of them.

Thanks I will check it out for hardware.

I am looking for one of the u-clips and bolt that is used for bolting the top of the dash in at the bottom of the windshield for a 68 Coronet. Picture of one installed. Only one was rusty to the point that I could not get the bolt out when I removed the dash 10 years ago. Thanks!

I am in the process of rebuilding my column current too and converting it. My automatic column didn’t have the lower spring either. Since my didn’t have it originally I was just going to put it back the way it was without the spring. Was the lower spring only on the 4 speed columns?

Here are some on Craigslist. I don’t think they are exactly what you are looking for but wanted to share it just in case. Goodyear Tires Polyglas E70-14 VINTAGE Originals NOS https://pittsburgh.craigslist.org/wto/d/goodyear-tires-polyglas-e70-14-vintage/7454987108.html

Is there a certain color you are looking for? I have the original blue ones that were in my '68 Coronet.

Thank you for the link. They say for 70-74. Are they the same for the 68-69 seats? Also that link show washers with the bolts. My seats did not have washers on them, should they?

I am looking for one hinge bolt for a 68/69 style bucket seat. I need one like pictured below.

If you haven't found one yet, I have one. Tried to send you a message but your inbox is full.

Looking for a 8 3/4" third member with 3.23 gears and a clutch style Sure Grip. I would consider other ratios as long as it is a 742 or 489 case as I believe those are the only cases that you can buy 3.23 gears for.

Looking to see if someone has a clutch pedal bearing install tool they are willing to let go. Bought one with an order from MegaParts 2 months ago but it’s still on back order. Jaime has no ETA in when he is going to receive more. Not in a major rush but I would like to get my pedals together...

I am looking for the bracket that holds the passenger side fresh air vent cable at the heater box. Picture below from manual showing the bracket. Somehow in the 10 years that I have had the heater box out of my car mine has broken off of the heater box. I am hoping maybe someone has from from...

I do not know if there are different styles or exactly what you are looking for. Here are picture of a blue one that was in my '68 Coronet 440 when I bought the car. I didn't inspect it closely, it needs to be cleaned up and there is pitting on the chrome.

If you haven't been able to find any used ones, maybe the ones at the link from PartsMix below are what you need. https://www.partsmix.com/products/large-washer-nuts-for-fenders-kit-pair.html

Here are some that are available. https://www.ebay.com/itm/NEW-1968-69-Coronet-H-L-Splash-Shield-Screw-Cap-/163991013677

Looking for a Rallye dash for a '68 B-Body. I would take a complete dash or just the frame. Let me know what you have. Thanks!