Search results for query: *

How often do you intend to remove your door panels....? The purpose of the "vapor shield" is keep moisture off the inner door panel, more then as a sound deadner. If inner door mechanisms are noisy or rattle..... fix them first.

On my doors I used a foil covered bubble wrap glued to the inside of the door skin and also to replace the vapor seal between the door frame and interior panel. It can be found at a home depot or Lowes....

I used the fat mat, (called rattletrap), in my chrysler 300 and it works great. Identical spec's to dynamat and just about 1/2 the price. I bought a 50 sq ft roll and used almost all of it to cover the entire floor, (69 300 conv). Got it off ebay with free shipping, and they even included a...

headlights flashing..... the headlights started flashing on and off. When I clicked it back to low beams, they stopped flashing. I'm not certain, but the dash lights may have been cutting out as well. I would look at the voltage regulator. Sounds like a spike causing the circuit to open...

Using a used valve cover for a sample will end up with a incorrect shade. The original turquoise, (blue) tents to change shades after several heat cycles. The closest to original i've found is either Totally auto or Dupli color. The POR15 shade is the furthest from original.

E 440 hp Lynch road assembly.... must have been a B body, GTX, Coronet or Charger R/T. Seems most of the early engines had the entire VIN stamped in their pad. Mid and late production ..just the year, plant and sequence.

Manuals Are there assembly manuals available for B bodies, like what GM uses ? Would help in putting a car back together correctly. The first things I look for before getting involved in any Mopar project are a factory service manual, owners manual and Chrysler parts book for the...

Ogden chrome Has anyone had any work done by this company? Just sent some pieces to them for a price quote. They are surpose to be really good at redoing diecast metal. Here is a link to Ogden chrome in Utah. I have not used them myself but have heard good things about them. Free shipping...

chrome Has anyone had any work done by this company? Just sent some pieces to them for a price quote. They are surpose to be really good at redoing diecast metal. Paul's is top notch quality at extremely top end pricing. Any shop you decide to use I would recommend sending a test part to...

High retail plus..... Looking at this for my next purchase, but seems a little high in price. Opinions please.. Seems like around high retail plus 20%. Things to concider.... Is the VIN engine code, (5th digit), a "U". (440 4 BBL). Numbers matching engine and trans...? (Should match at...

match.... so after looking at my car I noticed the vin on the dash and the numbers on the rad support are not the same.I have a 69 RR convert am I to think the support was changed? If your looking in the right place, (driver side, engine side of support,) the numbers should be 2 digits, a...

fuel sender test.... The fuel gauge in my '66 Plymouth Satellite reads "empty" all the time. The ground wire is good, I replaced it. I also disconnected the wire and watched the gauge, no difference. With the ign switch on and a test light connected to the sender wire you should get a...

Light steering easy fix..... My 67 Coronet steers so easy it feels like I dont even have control. Hoping this would help. Replacing the pressure regulator valve in your P/S pump with one from a 6 cyl A-body will reduce the line pressure from around 1100 lbs to around 800 lbs. This will...

Old school....... I guess you have not kept up on the latest NEW cars available. Mustangs, Camaros and Challengers. All rear wheel drive and available with a varity of engines that will compete with the factory engines of back in the day. This is all true.... but your missing the point of...

More Indy & York Pa...69 A few more from "the day"

Summer of 69..... I spent most of my summer in 1969 crewing for a friend who campained a 1969 street hemi Super Bee in SS/E class. Wally Booth landed a local Dodge dealer sponsership and the Super Bee was built from a brand new car in his garage in Lincoln Park. It was easy to find.... Parked...

I'll check my stash tomorrow. I have several sets of NOS blanks and may have some extra trunk blanks.... If so I'll just send you one.

adjust pushbuttons... Yes, I have the manual. Is it that sensitive - and so, that it could miss reverse only??? I have a 64 Dodge D200 with push buttons and have had to make the adjustment a couple of times in the past 12 years. Everything worked but reverse. You'll have to follow the...

cable adjustment.... It drives perfect in all other gears, but nothing happens, when I push reverse....? Could it be something else - a common thing, maybe ( I cant be the first in history, to have done this.........!)? Sounds like a cable linkage issue. Do you have a factory...

Made in USA Metro makes these parts themselves and B/E&A ( P&G) manufacturer theirs in China... so B/E&A says Metros are not great and do not fit well and my local supplier here buys from Metro because he says B/E&A - P&G are not great... so Gary My thoughts..... stick with the...