Search results for query: *

I did it to 69 charger don't for get the column will need to be changed as well. I did it myself and converted to console with 1970 pistol grip. I would say I cost me about 3500 back in 2007 and I did the labor . Today 8000 more.likey

This may be a dumb question but is the fender original? If so I probably had it when new , if it has been refilled when restored the Bondo might be able to be seen either with a very bright light and looking very close at the reflection. Or possibly from.thw back side of fender if not all...

Thanks bud finally got it to work had to have my son copy and paste in new browser lol I guess old dogs can learn new tricks LoL

I must not know how to use the link do I need to copy and paste on a computer? On the phone it does not show the tank stuff.

Thanks for help but the link above does not show the vent lines inside the trunk or under car . I need pictures of how the are mounted / pass through the trunk please

Could any one post or explain how the vent lines were installed and connected to the tank from the factory please . Putting together a super bee and floors have all been replaced and don't have the original vent pipes or floor gromets . Need to buy or make / fabricate. Thanks Cj

I would recommend finding a nice used one that is what I had to do. Post up on parts wanted ad .

I have a 68 charger with ac radiator from year one with their shroud and it works fine with the factory seven blade clutch fan that has the part number ending in 216 . had a five blade fan and with the ac on it would climb to 230 + deg F with the seven stays at 195 go's to 210 max . in hot...

Thanks for all info guys .

For me i would install the motor then install the trans from under the car i have allways done it this way so iam used to it but i have very nicely painted engine compartments so i do not want to risk a scratched up and gouged up fire wall. the 727 is very easy to ballance on a home made 12"...

thanks guys it will help me alot

HI Could anybody give me some pictures or measurements on where to drill the hole on the inside of the drivers door to mount the remote control on a 69 Coronet Superbee that never had a remote mirror ?

So the chargers are differant? This is my first b-body that is not a charger . the charger had a metal j channel like part to hold the trim on .

Does anybody have a clear picture of the rear package area on a 69 coronet or super bee ( Bare with out trim installed .) my superbee is missing something to mount the lower rear window trim , I think . Does anybody know about this ? IF i remember on my charger there were two metal...

Thanks HERBS is the place !

They have good service, but have gouge me on shipping they have charged me alot on shipping in the past. bought two bumpers from them and got charged $120.00 to ship them . Bought same bumpers from summit got them for $11.00 extra. I only use them if no one else caries the parts I need .

Sorry It is a 69 SuperBee M21 car . Any body carry the pop out quarter glass gaskets other than year one?

Does anybody know if the weather strips can be replaced in a quarter window on a post car ?I have the window out and the weather strips look like they have shrunk and do not seal properly all the way around . Does some one re pop these or have any good nos source for the rubber weather seal ...

Hi everyone i am sure this has been asked a million times but i am new here and not sure if or how to search . What is the biggest tire that will fit under a stock wheel house on a 69 superbee? Right now i have a 295 50 r15 old genral radial tire , looks like about a inch and half left ,(...

If you put a reverse manual valve body in the trans and file down the gate for the "normal D to 2 detent " then 1st is where D is and 2nd is still second and low is 3rd . works great on the factory shifter put in D for first then pull the handle back for second "don't push the buton " because...