Search results for query: *

If your planning to install dual exhaust, the larger stock tank will limit you to single exhaust. Smaller non hump gas tank should be available to replace your tank. Tank mounting straps need to match your existing tank. Keep up posted on your final installation.

I have a blue 75 Cordoba with a white vinyl top. Changed the white to black and repainted Daytona Blue. I'll be looking for the model. Thanks

Suggest you replace gas tank to a 74 model to extend exhaust out the rear. Exhaust gas below the chassis while sitting in traffic is unpleasant and allot quitter.

Words of wisdom and good advise are always appreciated.

Appreciate your sharing with photos. What about the carb spacer? Summit?

What is a curve similar? I believe your referring to limiting the distributor overall advance using a higher initial. Or perhaps an RPM Limiter?

Appreciate your comments.

Planning to replace lean burn system on a 75 Cordoba 400. Request a few details regarding the procedure: Install a standard distributor with control ignition module and wiring. Also plan to install a new carburetor. Remove old air cleaner and related wiring. What else? Other requirements??

If you still have the original distributor module with spark advance on the air cleaner I would replace it with a basic mopar ignition system. My 400 75 Cordoba had the same issue. Now it runs fine.

recommend deleting the blocks. Use pre-73 spring set-up with washers to act as spacers

If anyone needs Magnum emblems, have some NOS units and GT Badges. GT are in good condition, other are NOS. Have other NOS Parts, grill, front chrome units, send pm for more details. Also sun-roof units and a really nice black interior from a 75 cordoba

Nice conversion, you have a one of kind Charger. Small or large block? Need any parts?

If anyone is interested, I have a set of gauges from a 78 magnum with a tach unit for sale. send PM if interested

I assume you have a stock single exhaust system. Are you planning to install 2-1/4 or 2-1/2 dual exhaust system to the bumper? You know your gas tank will not support a dual exhaust system. For duals you need a smaller gas tank. One from a 74 will fit. Rock Auto has the best prices, also you...

Recommend installing a late model mini-starter. Its about 1/2 the size of the original unit. I'm also planning to install a 69 set on a 75 Cordoba. Do not anticipate a problem because the 75 400 model k-frame and drive line are the same as a 73/74 big block b body. Several members have...

One set of manuals I need to purchase is the late model b-body books. Again I apricate your taking time to respond to my inquire. Your information confirms the installation. Planning to have my dash recovered, this will provide an opportunity to replace the gauges. I also have an extra set...

Appreciate your taking the time to respond.

Checked the backside circuit strips. Appears you are correct. 12 pin connector should read as follows: Pin 1 Tech, Pin 2 Temp gauge pin 3 indicator Lamp pins 4 & 5 are the alternator current, Pin 6 indicator lamp, pin 7 fuel, pin 8 oil, pin 9 indicator lamp, pin 10 indicator lamp pin 11...

Plan to install a set of gauges with a tachometer in a non-tachometer dash. Other gauges are also configured differ. My concern is the dash wiring harness. Are the wiring harnesses the same for Magnum with or without the tachometer? I expect to add wiring to the ignition system but I need...

I believe the 75 model b body and later came with a removeable center piece. Basically the same look a the earlier models. 15" rims were 6.5 wide not 7 inch wide like the 70-71.