Search results for query: *

New dana 60 3:73 Richmond gears, never used still in box $200.00 plus shipping.

Shortened Dana 60 truck housing with Mark Williams caps. Caps have not been cut to fit. Housing is 41 1/4 wide. with axles width will be 46 1/4 wide. $350.00 will have to pick will not ship. Located in Newnan Ga

New Richmond 373 gear set for Dana 60, never used still in box with set up instructions. $270.00 plus shipping $15.00

If you are running a 4:56 up rear and would like to go to a lower gear , I have a 4:10 thin gear set for sale . This gear set can be used with out the cost of a different carrier . I got this from Herb Mccandless when he was closing up his shop . It was used in a Super Bee that was featured many...

1 3/4 x 3/4 u joint 1 3/4 x 3/4 36 spline u joint can be welded to shaft or drilled for grade 8 bolt to hold in place . Was bought for my steering shaft for my 65 afx car but went another way . $40.00 for both plus shipping

I have 4 3/8 heim joints , 2 left hand and 2 right hand threads , can be used for motor limiter or turn buckle for engine torque strap . asking $25.00 for will pay for shipping .

1978 440 motor block with cast crank from a motorhome . I bought it and was going to build a stroker motor , sold one of my projects and no longer need it . Has stock bore and can still see hatch marks in the cylinders from the factory . I have deburred the block of casting flash . Asking...

Picked this gear set up several years ago with the intent to use in the Dana 60 I had under my 66 cuda funny car . It turns out to be a thin gear set used on a 4:56 and up carrier . I had to buy a new gear set . So I hope this will help someone that wants to go to a lower gear ratio . Richmond...

Was asked to add more pics . Hilborn name and ridges have been machined off , it has not been cut on the lower rails .

426 Hemi Hilborn injection intake with billet aluminum stacks . has no butter flies or shafts . has been set up for EFI with the bungs welded in . Looks to have 1 3/4 throats for street use . Could be fixed to run or use as a test fitting when building a car . Stacks are 10 inches tall . Was...

Tried to do that tried to do that , several times would not allow me to close it . that's why I posted SOLD

Sold

Bought this for a 440 I was going to build . Plans changed . $125.00 plus freight . Sells new from Summit new $297.95 . Thanks for looking John

I have a pic of the id pad . I will have to get my brother to take more for you , just let me know what you want . The block has not been cleaned or anything checked on it . If you can send me your phone number I will have him send you the pic's you requested thanks John . My # 1-520-940-3672...

You are in N.C. take a trip to Raleigh .

Just the block . The rest of the items went to a guy that was building 426 wedge . He even wanted the pistons to try and reuse .

The motor was filled up with all the oil that the guy I got it from could get in it . I guess to keep it from rusting inside there was no water in the cooling system . I took the motor apart and stored the block . Have not checked anything else , The block is in Raleigh N.C. It has been stored...

1965 426 hp wedge block . Came out of a 1965 Dodge Monaco I bought and parted out due to rust in back half of car . Pulled the block and was going to build a stroker motor for my 65 AFX car but got a Hemi crate motor for it . Block has been in my brothers storage shed for 15 years . It is...

Sounds good , Just PM me with your phone number and I will call you . Thanks