Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Well, I am going to try to keep this short as I can and not write much about my ordeal with Cope Racing Transmissions but, I had issues with both of my transmissions he did for my one car. I took the car to his shop in Lowell because I wanted to ensure everything was done right. The car was a...
As far as big blocks are concerned for a cheaper street a 440 would be good. If money dictates a 400 stroker is good too. As far as small blocks go I would go with a 5.9 Magnum out of late model. They put out as much power and torque as 383 big block but, weigh a lot less. How does around 300...
Thanks guys I appreciate all the responses. I'll just stick with what I got right now. I was thinking of getting a 440 from a member here but, with things going on I'll just hold out. Thanks again.
Just wondering if there is much difference stock to stock from a late 400 to a 440. Obiviously, I am trying to find a 440 that will be going into the "Joe Mudd" project.
I already have the 400 sitting in the storage unit and not interested in building a stroker currently. It has a mild build...
Exactly, which why I asked about the pump seal. But, yes oil leaking on your transmission has no relation to how your transmission functions. Like I said check to see if the front pump seal is leaking. It will leak between the block and transmission but, the fluid trail will from the pan to...
Does it shift like this?
http://s328.photobucket.com/albums/l345/redx79/?action=view¤t=MVI1593.mp4
How many miles is on the 904 and what type of engine does it run behind? Are you sure its engine oil? Usually a leaking pump seal and loss of fluid will cause the transmission to slip...
Unfournately, not located close to Longview TX. About 1500 miles from it. Fuel lines shouldn't need to be changed. If it was a 440 yes but, seeing the 400 will use the same carb on my cammed 318 it should be fine. When switching to a 727 I didn't think I needed the trans mount? The wiring and...
I am debating rather or not I should rebuild my original 318 or buy a 318 roller cam engine in addition or if you will a 2000-2001 5.2 magnum. Lastly, I have a 57k mile 1974 400/727 that is currently a 2bbl engine and looks to be in great shape. I bought it 4 months ago and was told even if I...
The car in ? is a 68 Coronet 2dr with a mild 318/stock 904 transmission with a 741 case 2.76 geared 8 3/4 rear. The drivetrain is getting a little tired and before I throw any money at it. I am torn and back and forth on what to do.
My goal is to have a little more power maybe crack into the...
My car at WOT will smoke or taking off WOT from a stoplight other than that so far I don't notice anything abnormal under idle and normal driving. Other than when taking off from a light I get some oil/gas smell from the exhaust but, don't see any smoke. Just wondering if my problem is the valve...
Hello all, I have a 68 B-Body with a 318/904 setup and was wondering what factory setup would work with 4bbl setup that is now atop the 318? I have a linkage there but, I believe it to be factory the 318 2bbl setup and while it pushes the linkage back it does not go all the way back as my...