Search results for query: *

Rewind: It ended up being apart most of last summer. I put new torsion bars and rebuilt the front suspsension. Most of the mechanical parts were still good from 1989 (only maybe 40,000 miles on them). The passenger side lower control arm was seized. Had to cut the bar to get it to come out.

I've wanted a half track ever since the first time I saw one.

HMMMMMMMM, My 68 GTX doesn't have trim at the top of the door! What did that door come off of? It looks nice, but ????

Mocajava, With the extra height of the hump, will it clear the factory heater box and with the extra width, does it interfere with the stock location of the accelerator pedal? Thank you.

More pics. More pics. More pics.

That's what they need to clear out the college campuses.

You can use a 10 7/8 clutch on a 10.5” set up

Panthers are a handful again. Good series so far

Are those drawers empty?

I think I may have one. Mike

Transgo kits are designed for experienced transmission mechanics. Mike

Place a wanted ad for one here on the site. There's a lot of nice parts available here.

Normally to paint on plastic you remove the old finish. Then clean with a good grease and wax remover / surface prep. Dust with a adhesion promoter ( Bull dog ) ect. Then put a coat of epoxy primer/sealer with a little extra reducer in it. Then paint. Or....... for a small area like that go to...

I have never run those carbs on a cross ram. I have raced a cross ram in NSS for many years. I never was able to remove the secondary air valves and make the car leave the way I wanted, it always bogged a little. As several suggested I think the root cause of your issue is lag time between...

Thanks bee1971, nice article on rotor phasing, post #98

Bingo & bingo.

$125 plus shipping

1" of sprayfoam, heat. Bought a dehumidifier from a guy that grew weed, since the price of weed has declined in michigan since the big boys took over, used industrial dehumidifiers are pretty cheap picked one up almost new for $500, $2500 new. put in a minisplit ac also, for insurance, probably...

Just curious, how much does one of those aluminum center sections weigh?