Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Need a new alternator. Tuff Stuff 100 Amp $250. Flaming River 150 Amp $620. Could use the extra charge. Is the FR worth it. No problem spending the extra dough for quality product. Both one wire hookup
Thanks in advance
Jack
Electric radiator fan died today but wiggled wires and got back home in one piece. This four wire connector was very, very hot. Here is what I found.
No problem fuse will take care of it, right, nope.
This is a 30 Amp unbroken fuse. Check your fuses
PS: These were not cheap. I don't skimp...
One of the reasons this country is going down the **** tube. Reebok is coming out with these.
Very rugged look huh???
I'm too old to see this crap without getting pissed off.
I know there are some very smart people on the website so a fan question involving physics (I think it's physics).
If you have two 2500 cfm fans, one pulling and one pushing does that mean you are getting 5000 cfm or does one "rob" from the other
Yes the car overheats in hot weather when in a...
Woke up this morning and found this out my window. Something very large has decided to take up a residence under my shed. As you would expect my wife is freaking out.
The muddy prints are about 2" in diameter. Looks like it is getting in (and out) on both East and West sides. The mud on the...
Cars runs great so never had to screw with timing on the 440 but if I did, I assume I would use the "0" pointer mark which was marked by a previous owner.
Is that is correct and if it is what is the horseshoe shaped cut in the metal for
Need a top left door hinge for a 63 Dodge. One photo is the existing hinge and the other is the top hinge from AMD. Anybody know what gives here. They are very different.
Thanks
Jack
Toying with a cam swap. What are the chances that the solid lifters will come out with a strong magnet or do I say the hell with it and take the intake manifold. Engine fairly new rebuild. Low, tough miles
I have 63 / 330 with the following setup.
1969 440 block – 30 Over
1963 Max Wedge Heads
Ross pistons
Eagle H-Beam rods
Ultradine cam .613/.309 (Duration at .050” = 276)
M-1 (Mopar) intake, 950 Holly Double Pumper
MSD distributor with 6 AL / 2 Step
727 pushbutton w/slip yoke A&A manual valve...
Using Lucas Octane Booster and the car seems to like it. It says one bottle can be used for up to 25 gallons. Any harm is using a higher mixture. I wouldn't think so but thought I would the Gurus on the site
Thanks in advance
5.7 Hemi - 2012 Durango. Absolutley no problems for 85,000 miles. Check engine light comes on and it's running rough.
Dealer just called. Getting new cam and lifters. He says he is starting to see this on older 5.7
Covered under 100,000 mile warranty thank God.
Anybody else had an issue...
I have a neighbor "who really hates the racket" my 440 makes.
Time to really piss them off.
Any opinions who makes the best electric cutouts.
Cost doesn't matter, it's hidden retirement money. I want the best.
Thanks in advance
Jack
Time for new valve cover gaskets and fasteners on the ride.
Do you guys use head studs or are the covers just bolted on as they came from the factory.
Any opinions
Buying ARP whatever I get.
Thanks in advance
Jack
Loaned gun to Marathon Bomber. Now released. He learned his lesson.
The Democratic process
http://epaper.bostonglobe.com/BostonGlobe/article_popover.aspx?guid=2afff95c-0a10-4c4d-b204-08d5e5057a1d#sthash.tKvfZxHu
Craig's list ad. Read it closely folks...
A good one.
AN ACTUAL CRAIG'S LIST PERSONALS AD
To the Guy Who Tried to Mug Me in Downtown Savannah night before last.
Date: 2011-11-27, 1:43 am. E.S.T.
I was the guy wearing the black Burberry jacket that you demanded that I hand over, shortly...