Search results for query: *

I have 2 Fuel Vapor Separators one I bought from Classis Industries & one that i bought from Year One They both look identical but there is one small difference, The hole in the fuel return port on one of them is about twice as big as the other one so i guess the one with bigger hole will...

Did these 1970 Tanks with 2 vents use a vented Gas Cap? Also does vent line that goes up into trunk & back down inside the frame rail hook up to the short vent in the tank that ends just inside the front of the tank I know some of the aftermarket tanks have these vents reversed Thanks Lar

Could somebody tell me what Size, Brand, & Style tire would have come on a 1970 Hemi Roadrunner from the factory? Thanks Larry

Does anybody have instructions for adjusting the quarter glass on a 70 RR H/T the manual has some detailed instructions for the Valiant but when they get to the B Body there is not much there Thanks Larry

Anybody know where you can buy the bellows in the photo i think these actuators are the same as Charger Headlight Doors

Anybody bought the tires in the attached video? If so can they tell us what they think about them? Also would like to hear any comments

Could someone send me a picture of these on their car my 70 RR does not have these Better description at the link below http://www.classicindustries.com/product/mopar/parts/mb1268.html Thanks Larry

Looking at new after-market bumpers online Found 3 places that sell them Summit Racing has them & they say they are made by AMD Classic Industries & Year One do not say who makes theirs Does anyone know if they are all made by AMD And has anybody bought these bumpers & had any problems or...

Going to replace the exhaust manifold gaskets on my 1970 426 Hemi Regarding the exhaust manifold bolt holes in the heads Do the exhaust manifold bolts need sealant to prevent a coolant leak like some other mopar engines? Thanks Larry

http://www.barrett-jackson.com/Media/Home/Reader/1970-plymouth-superbird-epa-bird-barrett-jackson-las-vegas/?utm_source=EBlast-08172016&utm_medium=email&utm_campaign=EPA%20Bird%20On%20The%20Las%20Vegas%20Auction%20Block

My Air Grabber has stopped working properly Started opening slower & slower Now it won’t open all the way on its own If I bypass everything and attach a vacuum line from the fitting on the intake manifold to the air grabber valve on the hood it opens right up If I insert the vacuum...

Has anybody had any experience with these HIC valves just installed a new pair of NOS carbs Idles & starts great But i noticed after driving the car & letting it sit for about 20 minutes & then starting it again it has an erratic idle for a couple minutes then it is fine Guessing it is the...

Could someone tell which mirror below would be correct for a 1970 RR And any comments regarding the 2 types would be much appreciated Thanks

Anybody know where i can but the correct heater hoses for a 70 Hemi RR?

Does anybody have any tips on getting #7 spark plug out on 70 RR with Power Brakes Thought I would ask before i start removing things that maybe i don't have to Thanks Larry

Does anybody have any photos of any sideglass date coded logo, from an original piece of glass they could post? Thanks Larry

Does anybody Have a Fast Idle Stop Solenoid #DR1114429 They would like to sell? Thanks Larry

Who Makes the best reproduction carpet for a 1970 RR As far as fit & ease of installation Thanks Larry

Could somebody post some photos of their B body Hemi engine compartment What i am most interested in is the hoses that go to the air breather on the right valve cover from the air cleaner base & the rear carb Thanks & Happy New Year Larry

I am looking at a pair of 1970 Hemi carbs they look correct except the front carb is stamped C0 4742 but it is missing the S after the 4742 the tag has the S Has anybody seen this before