• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. C

    You know you’re in the country when…

    Let’s start a thread about things that you’ll only see in the country. This happens in my area, and likely lots of others, once a year. It’s take your tractor to school day.
  2. C

    Dremel question

    I have a 7300 Dremel, I've had it for several years. I can't seem to get it to take a full charge anymore. It should charge up in three hours but even after 12 hours it doesn't have enough power to run under any kind of load. Does the rechargeable battery wear out and need to be replaced?
  3. C

    Who flies through New York?

    We have flights booked for June and our return flight goes into JFK in New York. The connecting flight goes out of LaGuardia! We didn’t realize this when we booked them. So we have to get from one to the other. There are shuttle options available but I was wondering if anyone has done this...
  4. C

    Warning to Canadian car buyers

    Not a good time to buy a car in the US.
  5. C

    Which adhesive is better?

    I need to glue a braided cotton sleeve inside a wooden pocket. Which is better, E6000 or GOOP?
  6. C

    MSD spark plugs

    I got a set of these with a bunch of parts I got. Who made plugs for MSD? Also wondering what these might be for. They’re too short for any vehicle I own. Look more like lawn mower or chainsaw but why would MSD have plugs for that?
  7. C

    What does it cost to heat your shop?

    From Jan 11 to Feb 16 it cost me $4/day Cdn to heat my shop. That's about $2.90 US. My shop is 46 X 36 with a 14' ceiling and I maintain it at 48* and turn it up when I'm working in there. What's it costing you?
  8. C

    What is this distributor and what’s it worth?

    Just wondering if this distributor is anything special and what it might be worth.
  9. C

    Where to get a window sticker

    Does anyone know where you can get a factory window sticker replica made?
  10. C

    It only took four years to find the problem

    I’ve always had an intermittent tach problem with the Charger since I bought it four years ago. A buddy and I were trying to diagnose it recently and found this. There’s a purple wire on the tach signal bolt on the back of the tach. I had no idea what it was for but it made no sense. So it arced...
  11. C

    WHOA! Turn around

    I was driving through Canasota (Oneida), NY yesterday and came upon this. Does anyone know anything about this place?
  12. C

    It’s a bit like Christmas

    I got back from the US today.
  13. C

    Assembly plant question

    What cars were built in St Louis in 73?
  14. C

    GTX questions

    On 69 GTX I see some cars with a double hood blackout strip and some don’t. Was it optional? Also I found one car with a red stripe just below the chrome body side trim. I think it looks really good with the redline tires. Was this a personal touch? I can’t find any other images of it so I’m...
  15. C

    Looking for Phoenix area scrap yard

    BIL is looking for running boards for a 52 Ford F2 long box. He’s going to be in Phoenix in May. Is there any scrap yards that he can search that might have some?
  16. C

    Hanging a hood

    I took the fibreglass hood of my 68 Charger and went back to the original steel hood. The fibreglass one had a big scoop on it and I wanted the original look. Now I want to hang the fibreglass one on the wall so I was thinking of making a bracket to hold the hood pins and hanging the hood by the...
  17. C

    Looking for parts catalogues and information

    I bought this parts catalogue rack and I’m looking for catalogues to put in it. Particularly 68 and 74 Dodge cars and also 78 Dodge D100 and 83 Dodge W150 trucks. Do these racks use loose leaf catalogues or bound copies? Someone told me to look for bound copies but that they were only available...
  18. C

    Model engines

    I was given these engines today. Does anyone know if there were others? It would be great to get a big block and a small block to go with them. Maybe even a leaning tower of power.
  19. C

    Picked this up the other day.

    440 with a 680 Holley and a Comp roller cam. Should be fun.
Back
Top