Search results for query: *

Need the dome light assembly (bracket/bulb, socket & wiring harness. for a 2 door or 4 door sedan. It the rectangle one.

Need one good spindle for 65 B-Body -Dodge Coronet- for 10" drum brakes. Spindle shaft must be in good condition with no rust or wear and not from a wrecked car. Rust on the upright is ok. I believe left fronts are the same. Also some later years are the same.

Need a set of 8 bolts to attach the flexplate to the crankshaft. This is for a Gen II Hemi crate motor. 8 each 1/2" diameter, 20 Tpi, 1/2" long. Aftermarket or OEM. ARP bolts are on backorder for the foreseeable future.

One of my clips got broken taking off the molding-trim that goes above the door on a 2 door hardtop Coronet or Satellite. This is sometimes called drip molding or roof rail molding. I tried the reproduction ones and they are junk. I need at least one original.

Lost some more parts. I need the clips that hold the brake line along the lower firewall to floor flange. There is one clip in the center at the top of the tunnel. It looks like a hair clip fits into a hole on the floor flange. Then there are two semi flat clips, one on each side of the tunnel.

I need a complete 1966 automatic shift steering column. Would be nice to have all the linkage. I have installed a newer big block 727 transmission with shift linkage in my 1965 Coronet.

One of my clips has a broken off tang. Need at least one.

Need 2 tail light (not sure if its tail or brake) sockets complete with its pigtail and connector. Its the single wire one that uses a 1156 bulb. Photo attached.

Need original clips for attaching the front windshield trim. There are 18 but I take whatever you have. This trim is sometimes called reveal trim. I do not want reproduction clips as they are smaller. Photo of clips attached. Note they are 1-3/8 long by 1/2". 1964 are the same.

I need the J-nut clips that attach the lower back front fender to the frame. A stud goes into this J-nut with a nut to hold the fender. All the reproduction vendors sell a smaller (narrower) J-nut. I need the originals. I lost mine in the tear down. Need two.

Need new or a good used piece. This is the piece that is under the drivers feet. Seems everyone is out of 64-65 Floor panels.

Looking for a restorable instrument cluster. Mainly need an undamaged the front face bezel. Need something that can be re-chromed. Don

Looking for a restorable instrument cluster. Mainly need the front face bezel. New something that can be re-chromed. Don

I need a pair of 65 belvedere rear spring hangers and shackles. I believe 64 are the same.