• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. C

    WTB 1968 Dodge Charger Valve Covers

    Need a set of valve covers for a 1968 Dodge Charger with a 318 engine. Must be complete in excellent condition with the metal tags used to support the ignition wires. Thanks!
  3. C

    WTB 1968 Dodge Charger Chrome Trim Bottom of Left Rear Window

    1968 Dodge Charger: I need the bottom chrome exterior trim piece for the driver's side rear window. Thanks!
  4. C

    WTB 1967 Dodge Charger Stainless Steel Molding Under Grill

    I am looking for the stainless steel molding that is installed under the grill on a 1967 Dodge Charger that is in excellent condition. Thanks!
  5. C

    WTB 1968 Dodge Charger Drive Shaft and Yoke

    I need a drive shaft for my 1968 Dodge Charger, 904 Transmission, 8.75 rear end. I want a stock OM complete unit. It has a 318 engine. Thanks!
  6. C

    WTB 1968 Dodge Charger Drive Shaft

    1968 Dodge Charger, 318 Engine, 904 Transmission, 8 3/4 rear end. I need a drive shaft. Mine was stolen. Thanks!
  8. C

    WTB 1968 Dodge Charger Interior and Exterior Parts Wanted

    I need several trim interior and exterior parts for my 1968 Dodge Charger. I think 1969 and 1970 parts may also work. Several of my parts were stolen. I need too many parts to list them all here. Contact me if you have extra parts or a parts car. Thanks!
  9. C

    WTB Control Arm Brackets for Sway Bar for 1968 Dodge Charger

    Need 1968 Dodge Charger upper control arm brackets to weld on for sway bar. All vendors are out of stock. Thanks!
  10. C

    WTB 1968 Dodge Charger Rear Bumper bracket to frame bolts.

    Need all the bolts to secure bumper bracket to frame for the rear bumper. Thanks!
  11. C

    WTB 1968 Dodge Charger StabilizerBar

    Need stabilizer bar for 1968 Dodge Charger and the clamps, bolts, to fasten. Mine is a 318 car. Thanks
  12. C

    WTB 1968 Dodge Charger StabilizerBar

    Need stabilizer bar for 1968 Dodge Charger and the clamps, bolts, to fasten. Mine is a 318 car. Thanks
  14. C

    WTB Power Steering Pump for 318 Engine

    I need a power steering pump and brackets for a 318 engine. It is for my 1968 Dodge Charger. Thanks!
  15. C

    WTB 1968 Dodge Charger Parts Wanted

    My 1968 Dodge Charger was in a restoration shop and someone took several parts, bolts, fasteners, etc. Therefore, I am looking for a parts/donor car or someone who is parting out a car. I think a 1968 through 1970 would work. It would be easier for me to buy the entire car so I would be able...
  16. C

    WTB 1966 or 1967 Dodge Charger Trunk Lock Cylinder & Key

    I need a trunk lock cylinder and matching key off of a 1966 or 1967 Dodge Charger. Thanks!
  17. C

    WTB 1967 Dodge Charger Parts Wanted

    1967 Dodge Charger Parts Needed -Throttle bracket that holds the accelerator cable, bolts down to engine -Need the horizontal kick down rod that hooks on the carb. I have the vertical rod that the horizontal rod hooks onto. It Must be 383 or 440 4 barrel automatic. -Need the steel stops that...
  18. C

    WTB Air Cleaner Double Snorkel Wanted for 383 Engine

    I need a double snorkel air cleaner for my 1967 Dodge Charger, 383 4 barrel carb. The ends of the snorkel were flat. Thanks!
Back
Top